ladiesman217
Active Member
- Joined
- Dec 4, 2014
- Messages
- 39
Looks like I have to let my project go.
Started as a 1990 Yj tub w/ cj hood and grill on an 85 cj frame.
Most of the chassis is 1.75-.120 dom, also has a few pieces of
Chassis still needs to be finished.
Axles are 04 superdutys (hp60/10.5)
5.38s, welded front and rear. Stock shafts.
Trussed front and rear and set up for 4 link.
Also have Jessie Haines weld on high steer kit.
All lower links are 2"x.25 dom.
Most of the rodends are new 1.25" ruffstuff joints.
Front shocks are 2.0 16" foa coilovers. (No springs)
Also have 4" 2.0 foa airbumps.
Rear shocks are 2.0 16" King airshocks.
Motor is an 01 Iron block 5.3, have stand alone harness and computer (needs reflashed).
Trans is a 2wd th350 (was told it works, but i can't say for sure).
Have PSC hydro kit. (Orbital, 2x8 ram, and resivior).
Corbeau Baja ss seats with crow harnesses.
Wheels are 17x9 with tmi beadlocks 8x170.
Tires in the picture are already sold.
I don't want to part anything out.
Price is $6500
Located in Naples FL
Started as a 1990 Yj tub w/ cj hood and grill on an 85 cj frame.
Most of the chassis is 1.75-.120 dom, also has a few pieces of
Chassis still needs to be finished.
Axles are 04 superdutys (hp60/10.5)
5.38s, welded front and rear. Stock shafts.
Trussed front and rear and set up for 4 link.
Also have Jessie Haines weld on high steer kit.
All lower links are 2"x.25 dom.
Most of the rodends are new 1.25" ruffstuff joints.
Front shocks are 2.0 16" foa coilovers. (No springs)
Also have 4" 2.0 foa airbumps.
Rear shocks are 2.0 16" King airshocks.
Motor is an 01 Iron block 5.3, have stand alone harness and computer (needs reflashed).
Trans is a 2wd th350 (was told it works, but i can't say for sure).
Have PSC hydro kit. (Orbital, 2x8 ram, and resivior).
Corbeau Baja ss seats with crow harnesses.
Wheels are 17x9 with tmi beadlocks 8x170.
Tires in the picture are already sold.
I don't want to part anything out.
Price is $6500
Located in Naples FL