• Help Support Hardline Crawlers :

Sold/Expired Yj cj buggy thing Forsale

ladiesman217

Active Member
Joined
Dec 4, 2014
Messages
39
Looks like I have to let my project go.

Started as a 1990 Yj tub w/ cj hood and grill on an 85 cj frame.
Most of the chassis is 1.75-.120 dom, also has a few pieces of
Chassis still needs to be finished.

Axles are 04 superdutys (hp60/10.5)
5.38s, welded front and rear. Stock shafts.
Trussed front and rear and set up for 4 link.
Also have Jessie Haines weld on high steer kit.

All lower links are 2"x.25 dom.
Most of the rodends are new 1.25" ruffstuff joints.

Front shocks are 2.0 16" foa coilovers. (No springs)
Also have 4" 2.0 foa airbumps.
Rear shocks are 2.0 16" King airshocks.

Motor is an 01 Iron block 5.3, have stand alone harness and computer (needs reflashed).
Trans is a 2wd th350 (was told it works, but i can't say for sure).

Have PSC hydro kit. (Orbital, 2x8 ram, and resivior).

Corbeau Baja ss seats with crow harnesses.

Wheels are 17x9 with tmi beadlocks 8x170.

Tires in the picture are already sold.

I don't want to part anything out.
Price is $6500
Located in Naples FL






 
If the tires are sold I'll trade you my 46's on KR 20's 8x170 for the wheels. Solid rollers and mud bawger tars.
 
Re:

Aww man..loved it full body and looks sexy as hell now

Sent from my LG-H811 using Tapatalk
 
Can you post up some pictures of the link mounts at the axle and chassis?

Love the lines of this rig!!

Edit: also is this full width or has it been narrowed?
 
Blase said:
Can you post up some pictures of the link mounts at the axle and chassis?

Love the lines of this rig!!

Edit: also is this full width or has it been narrowed?

To my knowledge, the axles have not been narrowed.
 
Thanks. I should have been clearer. I was asking if the Cowl / Hood had been narrowed or if it was full width.
 
Trans and Tcase pictured are no longer in this? How much of the chassis needs finished welded? Does it have any tires right now or just wheels?
 
Chassis is prob 80% done. And mostly welded.
Majority of the tube work left to do is interior stuff and under the hood and dash.

Trans is included. It's a th350 that needs a 4wd output shaft. Was told its in good shape but I haven't been able to confirm.

No tires, but yes the bead locks are included.
 

Latest posts

Top