jeff150
Well-Known Member
SOLD
Buggy Specs:
1-3/4 DOM Chassis
GM 6.0 with Turbo 350 and 205 Transfer Case.
Dana 60 front, 5:13 gears, and spool. Yukon 35 spline axles.
14 bolt rear 5:13 gears and disc brakes
43 TSL SX stickies on aluminum TrailReady beadlocks (painted black)
1.25" heims. (Have spare aluminum links to go with it as well as spare driveshafts)
Wilwood brakes
16" Fox 2.0 coilovers
Corbeau seats
113" wheelbase, 21"belly, 69" overall height
$28,000
Axle Specs:
Wide Open Designs Custom 14 bolt front axle with the following:
WOD Extreme Knuckle kit,
RCV Ultimate 40 spline axle set
Solid Dana 60 forged front spindles
Dana 60 8x6.5 forged wheel hubs
Forged Dynalite calipers 1.25" width
Crane Chromoly diff cover
5.13 gears
40 spline spool
1350 yoke
Short side tube is 4" o.d. X .500" wall
Includes PSC double ended ram,
Completely built and set up by Wide Open Design
Made 5 rides with it before pulling it out to put in new buggy that was never built.
$11,000
Engine Specs:
Aluminum 6.2 LS3
8,000 miles when pulled
bought from Ricky Childers Performance last year
RCI billet cam kit,
Brian Tooley Racing chromoly pushrods and platinum valve spring kit
Includes C6 corvette pedal, and engine harness.
ECU and intake are not included
$5,500
Buggy Specs:
1-3/4 DOM Chassis
GM 6.0 with Turbo 350 and 205 Transfer Case.
Dana 60 front, 5:13 gears, and spool. Yukon 35 spline axles.
14 bolt rear 5:13 gears and disc brakes
43 TSL SX stickies on aluminum TrailReady beadlocks (painted black)
1.25" heims. (Have spare aluminum links to go with it as well as spare driveshafts)
Wilwood brakes
16" Fox 2.0 coilovers
Corbeau seats
113" wheelbase, 21"belly, 69" overall height
$28,000
Axle Specs:
Wide Open Designs Custom 14 bolt front axle with the following:
WOD Extreme Knuckle kit,
RCV Ultimate 40 spline axle set
Solid Dana 60 forged front spindles
Dana 60 8x6.5 forged wheel hubs
Forged Dynalite calipers 1.25" width
Crane Chromoly diff cover
5.13 gears
40 spline spool
1350 yoke
Short side tube is 4" o.d. X .500" wall
Includes PSC double ended ram,
Completely built and set up by Wide Open Design
Made 5 rides with it before pulling it out to put in new buggy that was never built.
$11,000
Engine Specs:
Aluminum 6.2 LS3
8,000 miles when pulled
bought from Ricky Childers Performance last year
RCI billet cam kit,
Brian Tooley Racing chromoly pushrods and platinum valve spring kit
Includes C6 corvette pedal, and engine harness.
ECU and intake are not included
$5,500