Hardline Crawlers
October 22, 2017, 07:28:29 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: We are currently working towards fixing notifications. Thank you for your patience.
 
   Home   Help Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Wide Open Design Buggy - 4 Spd Atlas, ORI's, 43" SX Stickies SOLD  (Read 2739 times)
tsak924

Offline Offline

Posts: 2


« on: June 12, 2017, 08:32:55 AM »

Bought practically new besides a few shake down runs summer 2015.  Has been my wife's buggy - been out approximately 10 times.  Original owner had WOD build it to a roller then finished it at his shop.  Have all receipts from original build.  

Here's a link to the build thread:  http://www.hardlinecrawlers.com/forums/index.php?topic=20170.0

WOD Chassis - lower bars and subframe are 1 3/4 x .188 wall DOM, rockers and sliders are .250 DOM, and the rest is .120.  All skids are UHMW.  Wheelbase is 113.  

Engine is an aluminum L33 5.3 HO rebuilt by Jeff Burns Performance Engine Works.  Cammotion XA 212-330-218-330-112+4, Comp Cams 5/16 7.40 Hi-Tech pushrods, 799 Heads redone with Z06 valves/5.70 valve springs, LS2 timing chain, ported oil pump, LS6 intake, injectors, TB, and MAF.  All Delco sensors, Mast Motorsports oil pan.  Harness and ECM are from an 02 Firehawk tuned by Wayne Hartwig at 150tunes.  LS1 starter and water pump.  WOD's complete GM LS engine alternator and PS pump relocation kit.  Sanderson Headers 2 1/2" to 3" WOD exhaust kit, all V-band, Magnaflow race muffler

TH400 with reverse manual valve body, Alto Red Clutches, Art Car Shifter, and two Griffin coolers with fans

Atlas 4 speed - lowest gear 5.44:1 - bought new and professionally installed since I've had it    

78' - 79' Ford Snowfighter High Pinion 60 front axle with Yukon 35 spline Chromoly Shafts, Superjoints, ECGS Spool, 4.88 gears, forged 1350 yoke, Crane Knuckles, interlocking Crane High Steer Arms, Crane Drive Flanges, PSC 2.5 x 8 steering ram, WOD truss, ram mount plate, and tube work

14 Bolt rear, shaved with UCF 13 bolt cover, Spool, thick cut 4.88 gears, forged 1410 yoke, Ruff Stuff Caliper brackets, Pinion Guard, Lugnut 4x4 brake kit, WOD Truss

Links are polished 7075 Aluminum 2 1/4 lowers and 2" uppers

14" ORI STX struts with remote reservoir - bought new and professionally installed last year

Griffin 31-16 Dual pass radiator with two SPAL fans.  16 AN Fragola fittings throughout cooling system

WOD Brake plumbing kit, all AN, Dual Wilwood Master Cylinders, residual valves, brake light switch, reverse flood light, Ruff Stuff Aluminum rear Ultra 4 light setup, LED interior strip

WOD GM Non-return style fuel plumbing kit with Walbro pump and pre-filter safety shut off valve - all AN.  Had a new 22 gallon JAZ Fuel Cell with an Artec bracket installed since I've had it

43" Super Swamper TSL SX Sticky tires on 17" Raceline Beadlock Aluminum wheels - approximately 80%+ tread life remaining.  Also comes with a brand new 43" SX Sticky on Raceline Beadlock spare

Corbeau Baja SS seats and harnesses.  Comes with an extra drivers seat - same look but made for taller driver

MISCELLANEOUS:  12 Volt Guy custom switch panel, Fuzion 205ra Marine radio with AUX, USB, and XM/Sirius Radio, Crawltunes speaker enclosures with Infiniti speakers, WOD master power switch, Marine volt meter/charger, 2 fire extinguishers with quick release brackets, Lazer Star headlights and lots of LED rock lights

$40K

Located in Richmond, VA
Will be happy to answer any questions or provide additional pictures/information 804-754-6778
Pics were taken yesterday and buggy will not be driven until sold
















« Last Edit: June 22, 2017, 08:15:07 AM by tsak924 » Logged
smbroady82
***
Offline Offline

Posts: 3126



« Reply #1 on: June 12, 2017, 09:54:16 AM »

Very nice  Double Thumbs

I got to check this one out once or twice when Tim had it.
« Last Edit: June 12, 2017, 05:22:53 PM by smbroady82 » Logged

My name is Stephen- Huntsville, AL
Double Low Hero
Beaner Bilt Toyota - 60s, ORIs, Reds
'06 Cummins,  6spd, 4x4, 37in Nittos
660 Rhino
2017 pile of parts

www.davesoffroadsupply.com
www.bluetorchfab.com
http://eastcoastgearsupply.com/
mundie
*
Offline Offline

Posts: 223


« Reply #2 on: June 12, 2017, 01:50:54 PM »

wheeled with this buggy a few time very nice buggy an works great
Logged
bluzuk80
***
Offline Offline

Posts: 1121



« Reply #3 on: June 13, 2017, 12:48:15 PM »

Still looks great.  Very fair price!
Logged

Tim Shewbart
Tupelo Ms
Wide Open Design Revolution
Built Alum LSX/400/Atlas/HP60/14/ORIs/Reds/Trailreadys
CHASMAN9
Just in town for supplies...
Hardline Crawler
*****
Offline Offline

Posts: 6642


Hardline forum member Administrator


« Reply #4 on: June 13, 2017, 01:58:56 PM »

Still looks great.  Very fair price!


Thought it looked familiar.  Another great WOD buggy.   Double Thumbs  GLWS 




ADMINISTRATOR
Logged

Gregg Cary
Chelsea, Al
"Heart Attack Buggy"
Many thanks to my sponsors;
Dewey, Cheatem, and Howe

RCV Performance Axles- Strongest axles on the Planet-www.rcvperformance.com
Sosbees off-road and Performance.
Jays Hydrographics- www.jayshydrographics.com
Team Yukon-www.yukongear.com
blaisi
tsak924

Offline Offline

Posts: 2


« Reply #5 on: June 19, 2017, 12:31:33 PM »

Thanks for all the interest!
Took a deposit on it today
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!