stuftmunky2k
Well-Known Member
Have ballistic fab housing 3.5" tube .25 wall. Passenger front drop. Rear has a truss on and the front has some armor welded on. Front measures 47.5" end to end. 16" short side to center of pinion and 31.5 end tube to pinion rear measures 56" end to end. Asking 800
Have a true bar to build 9" axles. 84" bar bearing pucks for third and end pucks that thread on to dana 60 spindles. Never used and have third to go with it for mock up. $500
Have a 9" third 5.13 gears with spool. Also has a pinion guard. 31 spline. Also have a factory 9" housing with full floater shafts. They welded factory ford spindles to the housing but was ran for years. No hubs tho just housing spindles and disc brake brackets. Asking 350 for third 200 bucks for factory housing with shafts or 450 for all
Shoot me a txt at 937-243-2925. Will be at harlan for labor day. Parts are located in marysville ohio
Have a true bar to build 9" axles. 84" bar bearing pucks for third and end pucks that thread on to dana 60 spindles. Never used and have third to go with it for mock up. $500
Have a 9" third 5.13 gears with spool. Also has a pinion guard. 31 spline. Also have a factory 9" housing with full floater shafts. They welded factory ford spindles to the housing but was ran for years. No hubs tho just housing spindles and disc brake brackets. Asking 350 for third 200 bucks for factory housing with shafts or 450 for all
Shoot me a txt at 937-243-2925. Will be at harlan for labor day. Parts are located in marysville ohio