the_white_shadow
Well-Known Member
- Joined
- Dec 25, 2014
- Messages
- 816
Im parting out a Chevy Dana 60 that i dont plan on using. Its currently disassembled as seen in the pics. Located in East Bernard, TX (77435). I will ship if necessary.
Chevy Dana 60 Housing - Setup for 3-link and PSC DE ram and was previously in a Toyota. Comes with a used Ruffstuff diff cover, Seals-it outer axle tube seals and the bearing caps inside. No gears installed. $175 for the housing.
Stock knuckles - $80 each
Spindles - SOLD
SRW Hubs - SOLD
Axle Shafts - USA Alloy 35-Spline outers, non-neckdown OEM inners, Spicer Joints - SOLD
Sky Offroad Offset Shackles - $50
Ruffstuff spring plates and u-bolts - $75
I have upper and lower steering caps as well.
All prices are OBO.
Chevy Dana 60 Housing - Setup for 3-link and PSC DE ram and was previously in a Toyota. Comes with a used Ruffstuff diff cover, Seals-it outer axle tube seals and the bearing caps inside. No gears installed. $175 for the housing.
Stock knuckles - $80 each
Spindles - SOLD
SRW Hubs - SOLD
Axle Shafts - USA Alloy 35-Spline outers, non-neckdown OEM inners, Spicer Joints - SOLD
Sky Offroad Offset Shackles - $50
Ruffstuff spring plates and u-bolts - $75
I have upper and lower steering caps as well.
All prices are OBO.
