Sold/Expired 1410cv front driveshaft

front 1410cv driveshaft with 1410 slip yoke as well
4.25" circle bolt pattern
3.125" pilot at cv
.46" hole

axle end
4.25" circle bolt pattern
2.00" pilot

tube size
2.50" x .120
around 33" in length compressed


located near Houston, Tx

$300




Name: IMG_1564.jpg
Views: 37
Size: 75.7 KB

Name: IMG_1562.jpg
Views: 37
Size: 47.5 KB

Name: IMG_1561.jpg
Views: 37
Size: 69.3 KB

Name: IMG_1568.jpg
Views: 37
Size: 52.1 KB

Name: IMG_1566.jpg
Views: 33
Size: 53.7 KB

Text me pictures to 5026001745

RULES: MUST have PICTURE, PRICE, & LOCATION, and be off road related.




ADMINISTRATOR

interested - give me a call 281-414-forty five ten

.

Sent from my SM-G950U using Tapatalk

fits np205 stock cv front flange. bolt up and go upgrade from 1330 to 1410

ttt

bump

How much angle does the CV get before it binds? Looking into what flange I would need to run off my 241C as a rear shaft.

87TPIYJ said:

How much angle does the CV get before it binds? Looking into what flange I would need to run off my 241C as a rear shaft.

Click to expand...

22*. specs are in the first post. start measureing

urmaster85 said:

22*. specs are in the first post. start measureing

Click to expand...

Didn't anything mentioned about angle in the first post. I was using the specs to find a flange. I thought a 1410 CV had more available usable angle.

87TPIYJ said:

Didn't anything mentioned about angle in the first post. I was using the specs to find a flange. I thought a 1410 CV had more available usable angle.

Click to expand...

https://fortwayneclutch.com/product/1410-series-2003-dodge-ram-2500-3500-front-driveshaft-hd-cv-head-assembly-sku-n924141g/

it says here 25* but it can be modified for more just like 1350 cv's

ttt

Is driveshaft still available

yes

urmaster85 said:

yes

Click to expand...

Can you quote me shipped to Kansas addy 66071 sir. Very interested.

got 2 more of these 1410cv shafts if anyone is interested

ttt