Hardline Crawlers
November 13, 2018, 11:30:11 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Check out the Calendar for all upcoming rides and competitions.
 
   Home   Help Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 2005+ Superduty Unit Bearing Cups  (Read 1668 times)
jethrobodean

Offline Offline

Posts: 49



« on: May 15, 2018, 06:02:15 AM »

Weld on cups to run 05+ Superduty Unit bearings on a rear axle. One of the Cheapest, quickest, easiest ways to go 40 spline rear.

Bored for 3.5" tubes, but easily taken out to 4" (or even bigger)

Located in Central Missouri (Mexico, MO 65265)    $375 + Shipping



Logged
wizzo
Easyline Crawler
****
Offline Offline

Posts: 1699



« Reply #1 on: May 15, 2018, 01:28:54 PM »

what material are you using?
Logged

Chris Weygandt - Glasgow, KY
buggy, 6.0L, th350, atlas 3.0, 60&14, 43" SX sticky mud tires
Forbanger
**
Offline Offline

Posts: 405



« Reply #2 on: May 15, 2018, 02:28:08 PM »

what material are you using?

Do you really need no lifts?Huh?
Logged

James Moore
Rineyville KY
wizzo
Easyline Crawler
****
Offline Offline

Posts: 1699



« Reply #3 on: May 15, 2018, 02:57:22 PM »

Do you really need no lifts?Huh?

I'm gonna build a 4 seat M&M chassis, likely this winter. I have two "big block" 14 bolt center sections with factory 4" tube to use to build axles. I have '05+ F450/550 c's and knuckles for the front and am going to buy a set of unit bearing cups for the rear. For a double ended shaft, 40 spline is kind of a no brainer at this point.

It's good to see more options for these out on the market. Just wanting more info on these.
Logged

Chris Weygandt - Glasgow, KY
buggy, 6.0L, th350, atlas 3.0, 60&14, 43" SX sticky mud tires
onepieceatatime
***
Offline Offline

Posts: 3782


I like turtles...


« Reply #4 on: May 15, 2018, 03:18:12 PM »

I think he was trying to say that you drive like a pussy!

Sent from my SM-G930T using Tapatalk
Logged

Zach Dobbs - Galloway Ohio
Forbanger
**
Offline Offline

Posts: 405



« Reply #5 on: May 15, 2018, 04:28:14 PM »

I'm gonna build a 4 seat M&M chassis, likely this winter. I have two "big block" 14 bolt center sections with factory 4" tube to use to build axles. I have '05+ F450/550 c's and knuckles for the front and am going to buy a set of unit bearing cups for the rear. For a double ended shaft, 40 spline is kind of a no brainer at this point.

It's good to see more options for these out on the market. Just wanting more info on these.

Awesome!  I love that chassis!  Best looking 4 seater out. And it obviously works. I was just giving you a hard time. I passed this on to a few buddies as soon as I seen it.  shit
Logged

James Moore
Rineyville KY
wizzo
Easyline Crawler
****
Offline Offline

Posts: 1699



« Reply #6 on: May 15, 2018, 07:37:13 PM »

I think he was trying to say that you drive like a pussy!

Sent from my SM-G930T using Tapatalk

LOL!

Awesome!  I love that chassis!  Best looking 4 seater out. And it obviously works. I was just giving you a hard time. I passed this on to a few buddies as soon as I seen it.  shit

I was torn about buying a chassis vs building another myself. PJ has his 4 seaters dialed in. Looks, form, function. It checks all the boxes for me. So decided not to try and reinvent the wheel for this one. When I'm ready to go back to a 2 seater or something else, I'll build another chassis /derail.

Need more info on these things!
Logged

Chris Weygandt - Glasgow, KY
buggy, 6.0L, th350, atlas 3.0, 60&14, 43" SX sticky mud tires
TBItoy
***
Offline Offline

Posts: 9840



« Reply #7 on: May 16, 2018, 04:07:55 AM »

I’m gonna say “steel”

No reason to build em out of any special material
Logged

Nick Cooper - Dodson Branch, TN

Contact  -   EAT.SLEEP.WHEEL@GMAIL.COM
jethrobodean

Offline Offline

Posts: 49



« Reply #8 on: May 16, 2018, 04:24:30 AM »

what material are you using?

1018 HR
Logged
nightcrawler4x4

Offline Offline

Posts: 71


« Reply #9 on: May 16, 2018, 02:29:04 PM »

What other parts do you make?
Logged
87_bigbadzuk
*
Offline Offline

Posts: 104


« Reply #10 on: May 16, 2018, 03:07:28 PM »

Dude is very talented. Makes complete axle housing I know of and have seen them. Top notch stuff out of a little garage. I'm sure when he gets time he will post up some pics! I'll let him know to report here.
Logged
jethrobodean

Offline Offline

Posts: 49



« Reply #11 on: May 16, 2018, 03:20:37 PM »

Right now it's fabricated housing builds, non fabbed shortening/lengthening etc. & these.  I'm working on a fabricated inner C & knuckle for the 05+ stuff, but those may be a while before they see any kind of real production. Like many, I saw a void for these axles & decided to try & fill it a little. The usual weld on steering, & maybe some misc. brake brackets coming, but guys are already doing those, so not focusing too hard on them.









Logged
wizzo
Easyline Crawler
****
Offline Offline

Posts: 1699



« Reply #12 on: May 17, 2018, 08:06:00 AM »

Looks good! I'll be in touch when I'm ready. Got some buggies to finish before I can start on my own.......
Logged

Chris Weygandt - Glasgow, KY
buggy, 6.0L, th350, atlas 3.0, 60&14, 43" SX sticky mud tires
nightcrawler4x4

Offline Offline

Posts: 71


« Reply #13 on: May 23, 2018, 03:08:59 AM »

Pm sent.
Logged
hokie_yj
***
Offline Offline

Posts: 1283



« Reply #14 on: June 08, 2018, 06:54:58 PM »

I need a set shipped to 37873 please.
Logged

"Beat it like it owes you money"

SXOR single seater build in progress

Ben Bellamy - Surgoinsville, TN
jethrobodean

Offline Offline

Posts: 49



« Reply #15 on: June 08, 2018, 08:16:16 PM »

I need a set shipped to 37873 please.

Sent you a PM, Thanks.
Logged
hokie_yj
***
Offline Offline

Posts: 1283



« Reply #16 on: June 14, 2018, 03:59:58 PM »

I got mine in today. I’m very pleased with them. They are massive, very beefy!
Logged

"Beat it like it owes you money"

SXOR single seater build in progress

Ben Bellamy - Surgoinsville, TN
KyTrash
***
Offline Offline

Posts: 874


« Reply #17 on: June 15, 2018, 08:36:57 AM »

Do you make any for the 99- 04 Fords ?
Logged
jethrobodean

Offline Offline

Posts: 49



« Reply #18 on: June 15, 2018, 09:41:47 AM »

Not yet. Tough to compete with Spidertrax or TG's pricing on those honestly.
Logged
KyTrash
***
Offline Offline

Posts: 874


« Reply #19 on: June 16, 2018, 06:21:55 AM »

Not yet. Tough to compete with Spidertrax or TG's pricing on those honestly.
  Thanks, But I'm NOT a TG Fan.
Logged
urmaster85

Offline Offline

Posts: 24


« Reply #20 on: July 31, 2018, 12:49:56 PM »

i just got myself a 14b out of a boxtruck with 4" tubes. but i only have 55" of overall tube before it necks down to  3 1/2".
my wms to wms target is 67"

wondering if you have a overall measurement of ub and cup.  that way i can start planning on where to cut axle
Logged
jethrobodean

Offline Offline

Posts: 49



« Reply #21 on: July 31, 2018, 07:50:49 PM »

2.8" from end of tube to WMS per unit  (so 5.6 total)

 Grin responded elsewhere & sent you a PM too.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!