This is a Wide Open Design chassis that has been modified for better departure angle and painted.
Built Chevy 1 tons, nitro 5.38's with spools front and rear. 35 spline chromoly shafts and Excalibur solid U-joints and drive slugs.
8" dual ended full hyrdo steering
1.75 hiems all around.
122" wheelbase
4 wheel disk with 100% braided stainless lines from master cylinder to calipers.
Custom 16.5 bead locks
44" boggers with small lugs cut out.
2" .250 links
16" 2.56 FOA coil overs all around
2.5 Air Bumps all around
Drive Train
Fresh rebuilt 6.0 LS
Polished cranks and rods
Mild flow work on heads with all new guts
Micro squirt EFI system to tune on the fly and harness is 1/3 as complicated as a factory LS.
Located in Copperhill, TN
Call Jim @ 706-455-5798
No trades. $15,900
Can text more pics if desired.
Sent from my iPhone using Tapatalk
Built Chevy 1 tons, nitro 5.38's with spools front and rear. 35 spline chromoly shafts and Excalibur solid U-joints and drive slugs.
8" dual ended full hyrdo steering
1.75 hiems all around.
122" wheelbase
4 wheel disk with 100% braided stainless lines from master cylinder to calipers.
Custom 16.5 bead locks
44" boggers with small lugs cut out.
2" .250 links
16" 2.56 FOA coil overs all around
2.5 Air Bumps all around
Drive Train
Fresh rebuilt 6.0 LS
Polished cranks and rods
Mild flow work on heads with all new guts
Micro squirt EFI system to tune on the fly and harness is 1/3 as complicated as a factory LS.
Located in Copperhill, TN
Call Jim @ 706-455-5798
No trades. $15,900
Can text more pics if desired.
Sent from my iPhone using Tapatalk