This buggy is awesome and ready to go. Located in Texas (940)733-3228.
You can't build it for this - $45K OBO!!!
-Jimmy Smith chassis built by Essentially Off-Road (Wheelbase 133")
-GM Performance RamJet 502
-Bowler Performance GM 4L80-E w/CompuShift Programmer
-Off-Road Designs 203/205 Doubler Kit and Triple Stick Shifters
-JB Conversions NP205 case and LoMmax 3:1 kit
-March Performance Pulleys Chevy Big Block Serpentine Conversion
-Hooker Super Competition Block Hugger Headers
-Dual 2.5 Flowmaster Outlaw Series Race Mufflers
-High Angle Driveline driveshafts with 1410s
-Front and Rear 7075 Aluminum 4-link bars from Summit Machine
-Billistin 2.5" x 14" Coilovers with remote reservoirs (9100 Series)
-Fox 2.0 x 3.0 Bump Stops
-Four Wheel Steer 2.5 ton Mohawked Rockwell Axles
-Ouverson Engineering and Machine- 2" 47 spline violator axle kits, Rockwell Violator Super 8 Hub and 6 piston disc brake kits,
front Rockwell Violator Locker, rear Rockwell Violator Full Spool
-Stazworks Rear Steer Self Centering (5 light kit)
-PSC 3" rams with 1.5 shaft, 10" stroke, dual PSC Power Steering Pumps and dual reservoirs and coolers
-17" Raceline Beadlocks with custom Rock Rings
-43" TSL SX
-Wilwood brake pedal with dual master cylinders
-Warn Winch 9.5ti with upgraded Endurance 12K motor
-Flex-A-Lite Aluminum Radiator and fan
-Custom MasterCraft Rubicon Suspensions Seats
-RacPac UDX Dash Display
-Crown Performance Brake Lines
-Taylor 8MM Pro Series lime green spark plug wires
-Derale Electra-Cool Transmission Cooler
You can't build it for this - $45K OBO!!!
-Jimmy Smith chassis built by Essentially Off-Road (Wheelbase 133")
-GM Performance RamJet 502
-Bowler Performance GM 4L80-E w/CompuShift Programmer
-Off-Road Designs 203/205 Doubler Kit and Triple Stick Shifters
-JB Conversions NP205 case and LoMmax 3:1 kit
-March Performance Pulleys Chevy Big Block Serpentine Conversion
-Hooker Super Competition Block Hugger Headers
-Dual 2.5 Flowmaster Outlaw Series Race Mufflers
-High Angle Driveline driveshafts with 1410s
-Front and Rear 7075 Aluminum 4-link bars from Summit Machine
-Billistin 2.5" x 14" Coilovers with remote reservoirs (9100 Series)
-Fox 2.0 x 3.0 Bump Stops
-Four Wheel Steer 2.5 ton Mohawked Rockwell Axles
-Ouverson Engineering and Machine- 2" 47 spline violator axle kits, Rockwell Violator Super 8 Hub and 6 piston disc brake kits,
front Rockwell Violator Locker, rear Rockwell Violator Full Spool
-Stazworks Rear Steer Self Centering (5 light kit)
-PSC 3" rams with 1.5 shaft, 10" stroke, dual PSC Power Steering Pumps and dual reservoirs and coolers
-17" Raceline Beadlocks with custom Rock Rings
-43" TSL SX
-Wilwood brake pedal with dual master cylinders
-Warn Winch 9.5ti with upgraded Endurance 12K motor
-Flex-A-Lite Aluminum Radiator and fan
-Custom MasterCraft Rubicon Suspensions Seats
-RacPac UDX Dash Display
-Crown Performance Brake Lines
-Taylor 8MM Pro Series lime green spark plug wires
-Derale Electra-Cool Transmission Cooler