Newbies Post Up Here - Rig Specs & Info Thread

Located in Erie PA. Best place for us to wheel that is worth a **** is Wellsville, OH aka Yellowcreek. Raucsh creek, Badlands. Finally making my first trip to Harlan in June. A few local clubs and outgoing members of the off roading community are working w/ the commonwealth of PA to get a state funded park open. We have had a few trail rides and work days there last year and 2 events planned for this year. So hopefully we can start to open the eyes of some of these people in office. And show them that there can be responsible off roaders out there.

Here is mine
axles: Dana 60 front welded, 14 bolt rear locker, 4.56 gear, Tires: 44's TSL in front boggers in rear
Motor: 350 with a few mods Trans: sm465, 205 transfer case twin sticked
Wheel base: 121"
Just built it last year, still tweaking a few things.

InDaShop said:

Thats a damn good looking TENN Rig!

Is that a skinned out Camaro hood? I like it. DANG Holla' Bang dat Bible and throw.

Click to expand...

thanks, the hood is a fiberglass 2" cowl for a 80's s-10 it came off of my old truck when I tore it down.

Name: Kevin Ehrhart
Age: 26
Location: New Orleans, LA
Rig: Work in progress
Done already: 81 CJ5, tons, 350, th350, 205, 4.56 f/r detroit in rear, welded front, leaf front, 3-link/coils in rear
Plans: propane, full hydro steering

Will post pics when I figure out how. Someone let me know.

When I started:


Two weeks ago:


Got more into it now but haven't had time to take pics. Will get more this weekend and post monday.

Friends rigs:
Jason:


TJ:


John:


Trip to MMORV. I think Ricky B. was there that weekend, but not with camera.

What's up! I'm Craig aka(TJCraig) Just no more TJ... The Rig is now an 83' Toyota Locked f/r longs in the front and chromos in the rear. 35" baja claws, 4.7 in the t case and the best upgrade yet 85' 22re. I would love to post some pics but I do not have any as of yet. I can't wait to wheel with ya'll.

New guy here from Florence AL. Pic of the jeep below - TJ with Dana 60's / 350 / atals - all the usual stuff

Hey Ya'll... I'm doc... new guy here. Here's my rock climber . It's got 33 mud tars and a lift kit.



...oh yea, got me some street locks and rocker skids too ;D

doc said:

Hey Ya'll... I'm doc... new guy here. Here's my rock climber . It's got 33 mud tars and a lift kit.

...oh yea, got me some street locks and rocker skids too ;D

Click to expand...

Bawaaahhaaaaa Why didn't you show the other car?
I kinda like it a LOT.

InDaShop said:

Bawaaahhaaaaa Why didn't you show the other car?
I kinda like it a LOT.

Click to expand...

...oh yea, fergot about that one. I gots me a mud buggy too ;D

Just realized that I never posted up in this thread.
Started with this 87 yj 6 cyl HP44 & 9"SOA 35 boggers

ended with this 87 yj 350 TBI SM465 231/300 D60 14b 42 irocks


Then got the buggy fever and bought this


Yea Frankie built it.

My buggy. Been working on getting the 350 running right the past month or so. Should be at windrock next week.

Jims Garage Chassis
350/th350/stak/60 (chromos)/14bolt

whats up guys... did a little damage to my rig trying to get ricky b. some pics for the WfW ride a couple of weeks ago, and well things snowballed... i busted my bellhousing on the ugly, so i ordered a lakewood unit, 1/4" hydroformed steel, and while talking to randy about the future demise of my buggy, i decided to link out the front.... randy came down to my place and he designed all of the bracketry for the front and then went to my local fab shop to get everything cut.... any how, here is the refresher.... 1 1/4" heims, 3 link, 3/8" wall tubing and brackets.... :smokin:

yeah, same rig, new front suspension... 454, lakewood bell housing, 32 spline output sm465, jeds machine steel adapter, 32 spline input 205, 32 spline output 1410 yokes, d60 w/ all the good stuff, detroit, alloy usa's, longfields, dedenbear knuckles, drive flanges.... and a bone stock 14 bolt w/ disk brakes....

it was ready for an update, the leafs worked suprisingly well for the abuse i gave them... but i want some of primos, so i had to man up....

New to the site, been wheeling Grayrock, Gardendale since 2003. I've wheeled with a few of you in Gardendale and the CAOS ultimate adventure 2005. I met Matt O. and Skillet my first ride in Gardendale back in 2004. Anybody recognize this guy?

I mostly wheel Morris Mountain these days as it is much closer. Still holding out for a park near the Auburn area.
My Rig:
1987 4runner
22re, Marlin 4.7 T-case, SAS, 4.88s, lockers f&r, Longfields, Full cage, Bobbed 15", Half doors, 36" iroks.


Hope to see you guys on the trails.

Wade

Hi,

This is my Toyota:

1987 WRANGLER
CHEVY VORTEC GEN III 402 (DELK PERFORMANCE)
TURBO 400
205 W/ 3.1 LOW MAX
ROCKWELLS W/ 2IN SHAFTS F&R
LOCKER IN FRONT SPOOL IN REAR
REAR STEER
4 LINK F&R
FOX COILOVERS F&R
FOX BUMPSTOPS FRONT
BECOOL COOLING SYSTEM
130 IN. WHEELBASE
47 LTB'S
5440 LBS.

Here's my rig:

60's f/r.....5:86....detroit front...spool rear
350/th350/lomax 205 3:1
3-link f/r
46 mickey's dbl beadlock