Sold/Expired 13 RZR 800 S

2013 Polaris RZR 800 S. 189 HRS. 89 miles since last full service, and new wheel bearings throughout. Custom cage and rear bumper 1-3/4 HREW tubing on all Wide Open Designs bungs and plates. Lexan windshield. Aluminum top rolled to fit. 5-point Harnesses. Stereo with Bluetooth and aux capability. $6900 OBO

So that's what mine should look like if all the body panels were still intact!

Random questions, but where did you get the windshield clamps/mounts?

ridered3 said:

So that's what mine should look like if all the body panels were still intact!

Random questions, but where did you get the windshield clamps/mounts?

Click to expand...

Amazon IIRC. I'll try to find you a part #.

matth_85 said:

Amazon IIRC. I'll try to find you a part #.

Click to expand...

Sounds great on possible Part #. Just been using zip ties since I take the windshield on and off, but mounts would be better.

Also what is the total mileage on the RzR? Going to pass this along to a buddy of mine.

ridered3 said:

Sounds great on possible Part #. Just been using zip ties since I take the windshield on and off, but mounts would be better.

Also what is the total mileage on the RzR? Going to pass this along to a buddy of mine.

Click to expand...

I think its around 1,400 miles.

https://www.amazon.com/LOKMAN-Stainless-Cushioned-Insulated-Installation/dp/B01ISZLGYW/ref=sr_1_5?keywords=1-3%2F4%22+pipe+clamp&qid=1551368077&s=gateway&sr=8-5

That should work but it's this
Lokman
LK-88
1-3/4 cushioned cable clamp

$18 for 20 of them on Amazon (millennial's Wal-Mart).

matth_85 said:

https://www.amazon.com/LOKMAN-Stainless-Cushioned-Insulated-Installation/dp/B01ISZLGYW/ref=sr_1_5?keywords=1-3%2F4%22+pipe+clamp&qid=1551368077&s=gateway&sr=8-5

That should work but it's this
Lokman
LK-88
1-3/4 cushioned cable clamp

$18 for 20 of them on Amazon (millennial's Wal-Mart).

Click to expand...

Thanks for the link and info.

Sold