Recent content by hhc

plus with the reduction in the diff the stock cv should be seeing less force than if it was straight to a tire

a good diesel shop (like one that builds there own tunes) should be able too. i live in no where so we got dodge to swap buddys for the trans

you may need to find a vin but when we swapped buddys to manual we just got it flashed and they basically told the computer to stop looking for the trans i see no reason they couldnt do the same with the t case. your 06 is auto im guessing? i have a 04.5 6 speed id share the vin with you but i...

why dont you just put a 271 in, pay the 40$ and get dodge to flash your computer into thinkig it was a floor shift model

i run a Motorola vhf in my work truck (i have my vhf/uhf license for both land and water) and a 40w baufung in my person truck. always used handhelds in the wheelers since i went away from cb radios. they work great side note. you "need" a license depending on watt's for vhf/ uhf but here in...

if you want to try a restriction plate all we do at work is take a buffer (or file) and knock the peened ends of the hoop off. then you can easily gut the thermostat and just run the plate. another thing however is it a top/bottom tank rad or a side tank rad? if side no matter how fast its...

if i was to start again with a first gen dodge (and i am picked up a 92 crew cab short box cummins) right off the bat i would pull ever damn wire outta that thing and put in a painless (or similar) harness with actual fuses. ive had a couple first gens and most of them where trouble free but the...

what style fuel shut off? is it a impco system? check for good spark also check your vacuum lines. the vaporizer has a shut off built in that needs vacuum to turn on (depending on model it will have a separate line or it will need vacuum in the larger fuel line to your mixer) also when you...

thought id let you know, just red this whole thing and your amazing work building this is why i signed up for this forum. :****: