easy breezy diff armor

Had 1-14 bolt, and 2 covers, sooooo out comes the cut off wheel and welder, free double thick diff cover.

nice duct tape job too:awesomework:

halemytoy24 said:

nice duct tape job too:awesomework:

Click to expand...

Its gorilla tape,duh:fawkdancesmiley:One of those temporary/permanent kinda things.

Thats actually an interesting concept.... :awesomework:

You should use the bolt ring to reinforce that as well...

dirtygoat said:

You should use the bolt ring to reinforce that as well...

Click to expand...

Good idea:awesomework:.I was thinking of welding on triangles like shark teeth and hanging it up in the garage as art.

Nice...:redneck:


I used angle iron for the bolt ring and some 3/8 flat stock over the ring gear...

dirtygoat said:

Nice...:redneck:


I used angle iron for the bolt ring and some 3/8 flat stock over the ring gear...

Click to expand...

how bout some pics :awesomework::beer:

I shaved a lot off my 14b, it actually has more clearance than my d60...

After thinking about it for a bit, I figured this would be the best way to protect and keep my cover from peeling off... BTW, it's now a 13 bolt...:redneck:


Used a HF pipe bender to bend the flat stock for the ring gear strap... This just bolts directly over the stock cover...

Here's the stock cover after it was cut to match how much I shaved off the pig... And installed under the Blazer...

nice:awesomework: