Search results for query: *

Ready for simple. Might but a little turbo on Iit

22r and propane

Pulled it apart. I could only take it so far before it got too expensive

Took out the Curtis 500amp controller and put in a adjustable 1000amp Zilla controller and drive by wire pedal. Also adding another 7kwh of batteries. 2 weeks to get it ready for Feb Jam.

Evansville. Go wheeling at Interlake park a lot.

Did great slow rock crawling. It was controllable more so than gas with a automatic. Probably gonna go back to 39 reds because it will making everything more doable. It will help with weight, gearing, power, range, and easier to turn and turn sharper because with the treps I have to limit the...

I’m definitely interested.

360v pack was 2k. Could be used with solar panels also for a home.

Not much. Did take the 200 orbital and put in a 125. With 3 turns instead of 2 it is a lot happier. Bad weather last weekend but plan to hit the local park this coming weekend.

The Warp9 electric traction motor. It was dropped during shipping so I’m not surprised.

Took it out once for to hours and had motor problems. I think the orbital is too fast ( less than 2 turns lock to lock) so I ordered a slower one from beyond precise. Plan to go again Sunday with a new motor if we don’t get rained out.

I’m noting anymore, just a factory worker. Was a welder for a long time and did go to school for auto mechanics but never did it for a living

Just noticed at the end of the video the volts were dropping into the 11s. With voltage up around 13 the pump should spin faster and pull fewer amps.

I won’t know until I get it out on some trails. The orbital is 2 turns lock to lock so the steering wheel won’t turn real quick like it would with a orbital that is 4 turns lock to lock.

Not a very good video but it might answer some of the questions about the Volvo pump. Amps were about 6 not turning the wheel, 30s while turning, and holding it full lock mid 80s.

I’ll try to get a good battery on it tonight and do a video with amps and voltage. Probably few more weeks before I can get it in the rocks.

Just a switch

The big red wire and the single unstranded wire need to see 12v plus the ground. I’m going to put it on a relay. In the barn turning the wheel I can hear the pump spinning faster and pulling more amps. 100amp relay probably would have been enough lol