Menu
Forums
New posts
Search forums
Calendar
Monthly
Weekly
Agenda
Archive
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Help Support Hardline Crawlers :
Forums
Rock Crawling Forums
Tech & Fab
SXOR single seater build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="hokie_yj" data-source="post: 487317" data-attributes="member: 4238"><p>I worked on the midship shafts today and got both of them tacked together and the carrier bearing mounts tacked in place. The carrier bearings are WOD's single ended bearings. The weld yoke is a Spicer 3-28-777 welded into a short piece of 2.25"x.250" DOM to sleeve into the 2.5"x.120" tubing. And the end yoke is a forged 32 spline 1350 yoke from Northern Drivetrain. </p><p></p><p>Starting on the rear shaft. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/0875A17E-02C0-45CE-AE8B-D3DB8827928E_zps6uid9zbw.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/0875A17E-02C0-45CE-AE8B-D3DB8827928E_zps6uid9zbw.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/7B9ECAFD-BCCA-438E-816A-4F001E8826D3_zpsjht1q0p4.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/7B9ECAFD-BCCA-438E-816A-4F001E8826D3_zpsjht1q0p4.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>Here's my redneck fixture I set up to get them as square as possible and the joints in phase. I'm sure there are much better ways of doing this, but it's what I came up with and it worked pretty well for me. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/57E1BDF5-6B23-4E69-967F-115B0B9FC6D6_zpsptzaeecr.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/57E1BDF5-6B23-4E69-967F-115B0B9FC6D6_zpsptzaeecr.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>All tacked together. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/A84D56A6-CAC4-4161-85D1-45E5BC8FFF69_zpsimcxnk5d.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/A84D56A6-CAC4-4161-85D1-45E5BC8FFF69_zpsimcxnk5d.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a> </p><p></p><p>And tacked in place. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/1A575249-13F7-4F4A-9345-ECDB1B223C6B_zpsyjkyxmih.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/1A575249-13F7-4F4A-9345-ECDB1B223C6B_zpsyjkyxmih.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>This picture makes it look a little closer than it really is, but it should clear the shifter linkage just fine. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/EE14EA99-F569-465D-93E8-F17640D351C9_zpsa3kqo1lm.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/EE14EA99-F569-465D-93E8-F17640D351C9_zpsa3kqo1lm.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>Looking back from where the pinion yoke will be. As you can see this thing will see some pretty crazy angles. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/4744D49A-CE24-45E5-B517-BA5BEAABC39B_zpsbbey6yiw.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/4744D49A-CE24-45E5-B517-BA5BEAABC39B_zpsbbey6yiw.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>Putting together the front shaft. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/FD96B1F7-145F-426D-879E-292939315248_zpsyynbxejo.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/FD96B1F7-145F-426D-879E-292939315248_zpsyynbxejo.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>Mounted in place. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/CF181566-E1E5-414F-85DE-C2EACC95D31A_zpsvnbpnkzm.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/CF181566-E1E5-414F-85DE-C2EACC95D31A_zpsvnbpnkzm.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>And looking back from the pinion again. The front shaft won't have near the angle that the rear does. </p><p></p><p><a href="http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/EABA0690-79EE-4340-AEDC-B3A1F977FEF1_zpsmyqmxry6.jpg.html" target="_blank"><img src="http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/EABA0690-79EE-4340-AEDC-B3A1F977FEF1_zpsmyqmxry6.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></p><p></p><p>I originally planned to put short slips in these shafts hoping that would help with vibration. I already had all the parts to make the shortest slip I could find. But I mentioned it in another thread and Ryan from He-Man Machine recommend that I not put a slip in them. And since he designed and builds the bearings I figured I should definitely take his advice.</p></blockquote><p></p>
[QUOTE="hokie_yj, post: 487317, member: 4238"] I worked on the midship shafts today and got both of them tacked together and the carrier bearing mounts tacked in place. The carrier bearings are WOD's single ended bearings. The weld yoke is a Spicer 3-28-777 welded into a short piece of 2.25"x.250" DOM to sleeve into the 2.5"x.120" tubing. And the end yoke is a forged 32 spline 1350 yoke from Northern Drivetrain. Starting on the rear shaft. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/0875A17E-02C0-45CE-AE8B-D3DB8827928E_zps6uid9zbw.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/0875A17E-02C0-45CE-AE8B-D3DB8827928E_zps6uid9zbw.jpg[/IMG][/URL] [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/7B9ECAFD-BCCA-438E-816A-4F001E8826D3_zpsjht1q0p4.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/7B9ECAFD-BCCA-438E-816A-4F001E8826D3_zpsjht1q0p4.jpg[/IMG][/URL] Here's my redneck fixture I set up to get them as square as possible and the joints in phase. I'm sure there are much better ways of doing this, but it's what I came up with and it worked pretty well for me. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/57E1BDF5-6B23-4E69-967F-115B0B9FC6D6_zpsptzaeecr.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/57E1BDF5-6B23-4E69-967F-115B0B9FC6D6_zpsptzaeecr.jpg[/IMG][/URL] All tacked together. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/A84D56A6-CAC4-4161-85D1-45E5BC8FFF69_zpsimcxnk5d.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/A84D56A6-CAC4-4161-85D1-45E5BC8FFF69_zpsimcxnk5d.jpg[/IMG][/URL] And tacked in place. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/1A575249-13F7-4F4A-9345-ECDB1B223C6B_zpsyjkyxmih.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/1A575249-13F7-4F4A-9345-ECDB1B223C6B_zpsyjkyxmih.jpg[/IMG][/URL] This picture makes it look a little closer than it really is, but it should clear the shifter linkage just fine. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/EE14EA99-F569-465D-93E8-F17640D351C9_zpsa3kqo1lm.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/EE14EA99-F569-465D-93E8-F17640D351C9_zpsa3kqo1lm.jpg[/IMG][/URL] Looking back from where the pinion yoke will be. As you can see this thing will see some pretty crazy angles. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/4744D49A-CE24-45E5-B517-BA5BEAABC39B_zpsbbey6yiw.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/4744D49A-CE24-45E5-B517-BA5BEAABC39B_zpsbbey6yiw.jpg[/IMG][/URL] Putting together the front shaft. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/FD96B1F7-145F-426D-879E-292939315248_zpsyynbxejo.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/FD96B1F7-145F-426D-879E-292939315248_zpsyynbxejo.jpg[/IMG][/URL] Mounted in place. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/CF181566-E1E5-414F-85DE-C2EACC95D31A_zpsvnbpnkzm.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/CF181566-E1E5-414F-85DE-C2EACC95D31A_zpsvnbpnkzm.jpg[/IMG][/URL] And looking back from the pinion again. The front shaft won't have near the angle that the rear does. [URL=http://s38.photobucket.com/user/boomboom33/media/Project%20Redneck%20Rock%20Rod/EABA0690-79EE-4340-AEDC-B3A1F977FEF1_zpsmyqmxry6.jpg.html][IMG]http://i38.photobucket.com/albums/e102/boomboom33/Project%20Redneck%20Rock%20Rod/EABA0690-79EE-4340-AEDC-B3A1F977FEF1_zpsmyqmxry6.jpg[/IMG][/URL] I originally planned to put short slips in these shafts hoping that would help with vibration. I already had all the parts to make the shortest slip I could find. But I mentioned it in another thread and Ryan from He-Man Machine recommend that I not put a slip in them. And since he designed and builds the bearings I figured I should definitely take his advice. [/QUOTE]
Insert quotes…
Verification
Post reply
Latest posts
2-2.5 ton Rockwell’s new in crates
Latest: Piros 1
Saturday at 2:42 AM
Off Road 4x4 Parts For Sale
For Sale
Jeep TJ tube buggy for sale $32,000.00
Latest: Piros 1
Saturday at 2:41 AM
Vehicles For Sale
T
For Sale
85-91 Ford Kingpin Dana 60 $2k
Latest: truck-oholic
Friday at 3:58 PM
Off Road 4x4 Parts For Sale
Pluging holes
Latest: baldduck74
Wednesday at 3:56 PM
General Discussion
Trail gear hydro assit on a toyota
Latest: baldduck74
May 6, 2024
General Discussion
Forums
Rock Crawling Forums
Tech & Fab
SXOR single seater build
Top