• Help Support Hardline Crawlers :

Garage/shop floor paint

bsfor

Well-Known Member
Joined
Feb 25, 2011
Messages
152
Do you guys use the cheap stuff from walmart or the epoxy? do you like it or does it suck just looking for some opinions before I paint my shop floor. thanks
 
When they redid our shop they had it acid washed and painted. Used a roller and some cheap ass **** from lowes. It lasted about 2 years and if you get gas or brake cleaner on it it turns back to paint and gets all over your boots or anything that touches it. :puke:
 
At the day job I'm an industrial consultant and we do a lot of coatings. If it were mine I'd go with Sherwin Williams macro proxy 646 with a clear urethane top coat for UV resistance. I would pressure wash the entire floor then get some like pro prep outta Nashville (should be around .75-1.00 a sq ft) to shot blast the floor. Or rest a shot blast rig or scarifier. If you want good tight adhesion you're going to have to mechanically prep the surface...
 
The most important thing I learned from pressure washing for years, it's all about the prep.. Use muriatic acid when pressure washing, soon as it gets good and dry lay that **** down. Me and my buddy did is, he was impatient and just swept the floors and it was peeling up everywhere, then I did another one with someone and we pressure washed it and it was a totally different outcome. Both use the kit with the bag of stuff that you sprinkle to make flakes on tha floor. U prob know what im talking about. The one that washed the floor first did use two coats of that stuff and let it dry very good. The only marks I saw was where he had a car park for a really long time. Some chips peed up when he moved the car. I would go with the Sherwin williams stuff as mentioned if it was me. Good luck
 
I just used this past weekend Valspar garage coat from Lowes. I really like the way it turned out. But like they said its all in the prep work!
 
I had my new shop floor finished smooth , then had it sanded, acid etched, and sealed. Love it.
Kevin, bringing this back to the top.

I'm bouncing back in forth between doing the last step. Not sure whether I should do just the concrete sealer or the epoxy flakes/sealer. I'm concerned that the stickies and moving rigs around will peel that **** right off. How did it hold up?
 

Latest posts

Top