• Help Support Hardline Crawlers :

Newbies Post Up Here - Rig Specs & Info Thread

jeeptj99 said:
you ever been to Rausch creek? We are talking about another trip up there soon. Welcome to the board.

Yeah Rausch is great, been going there for years. They keep opening up new trails.
 
Newb here on Hardline. Truck specs are 1996 S10 4.3 V6, 4L60E, 4.3 Atlas II, Toyota axles, TMI beadlocks with 37" PBR's, Exocage by Cutler Fab. Currently on jackstands for a complete overhaul. Tons have already been acquired and an LS is in my near future.
 

Attachments

  • Exocage 30.jpg
    Exocage 30.jpg
    1.5 MB · Views: 449
The Luke said:
Well, new hardline is off to a great start. Lol

Yup, somehow I missed the thread about it being down and wondered why I couldn't get on earlier and now it looks very squarish. Guess we'll see how it goes or doesn't.
 
xjmarc said:
Yup, somehow I missed the thread about it being down and wondered why I couldn't get on earlier and now it looks very squarish. Guess we'll see how it goes or doesn't.
when I posted that. There was an ad on here for cybersex with a pic of a lady and her roast beef sammich.
 
Been on here a while, but figured I would post up to introduce myself. Dan from Toledo, OH living in Houston for the last 7years. Been into off-roading everything from dirtbikes, four wheelers and jeeps for years. Got tired of worrying about glass and body panels getting tore up so a couple years ago I picked up an unfinished Jimmy Smith Chassis from a guy in MO. His wife was tired of it sitting, so I got it two weeks before hurricane Harvey and then it sat in my garage for 4 months while I helped a friend fix their house. Finished it in Nov of '18 and drove it til July of this year to make sure we had all the bugs worked out before powdercoat. Got it back together in late August (yah, 7 weeks for teardown, powdercoat and reassembly!). Here's the specs...
2017 Jimmy Smith Chassis
385 Stroker/Fitech FI/TH350/Atlas 4sp
F/R Steer Rockwells w/Lockers/43" Stickies on Stazworks Double Beadlocks
18" Swayaways - wishing I had coilovers - maybe next year when the bleeding stops from building this thing.
 

Attachments

  • IMG_2599.jpg
    IMG_2599.jpg
    1.1 MB · Views: 442
  • IMG_3381.jpg
    IMG_3381.jpg
    652.3 KB · Views: 464
  • IMG_3504.jpg
    IMG_3504.jpg
    511.7 KB · Views: 454
  • IMG_3563.jpg
    IMG_3563.jpg
    334.6 KB · Views: 485
Been on here a while, but figured I would post up to introduce myself. Dan from Toledo, OH living in Houston for the last 7years. Been into off-roading everything from dirtbikes, four wheelers and jeeps for years. Got tired of worrying about glass and body panels getting tore up so a couple years ago I picked up an unfinished Jimmy Smith Chassis from a guy in MO. His wife was tired of it sitting, so I got it two weeks before hurricane Harvey and then it sat in my garage for 4 months while I helped a friend fix their house. Finished it in Nov of '18 and drove it til July of this year to make sure we had all the bugs worked out before powdercoat. Got it back together in late August (yah, 7 weeks for teardown, powdercoat and reassembly!). Here's the specs...
2017 Jimmy Smith Chassis
385 Stroker/Fitech FI/TH350/Atlas 4sp
F/R Steer Rockwells w/Lockers/43" Stickies on Stazworks Double Beadlocks
18" Swayaways - wishing I had coilovers - maybe next year when the bleeding stops from building this thing.
Sweet rig
 
It's just another YJ, but a capable one.... hopefully.
I've been creeping in the shadows for little over a year now. Finally finished my build so now I have something to post. I bought my jeep 3 years ago and a couple of months after I bought it I found out me and my wife were gonna have a second kid, I'm sure none of y'all have had that happen. Anyway it sat in the basement for almost 2 years with nothing being done to it, its ready for some trails now though.

Specs:
- 92 YJ with stock 4.0 and 5 speed trans
- NP231 w/ tera-low 4:1 kit and SYE
- 4 linked front D60, 5:38 gears welded, full hydro steering, 2.5"/14" travel air shocks
- 4 linked rear D60, 5:38 gears spool, 35 spline Yukon shafts, disc brakes, 2.5"/16" travel air shocks
- 7/8" heims
- 40x17 tsl's
- WB 117"

That's the talking points, there are some other bolt on crap that doesn't matter. Every tab, truss, shock tower on it was made by me. It ain't perfect but it works.... so far. No project is ever finished so more upgrades to come.
 

Attachments

  • 20190921_154202.jpg
    20190921_154202.jpg
    2.1 MB · Views: 445
  • 20190921_161836.jpg
    20190921_161836.jpg
    1.9 MB · Views: 421
  • 20190922_094529.jpg
    20190922_094529.jpg
    2.2 MB · Views: 416
Last edited:
i have been here for a little while but never posted up here... so here we go...

very old werock buggy (built in 99-00 ish from what im told) won supercrawl in 2003 and got the fancy axles then...
full tube chassis
bilstine coil overs (for now thinking about putting ORIs or some other coil over or air shocks...)
dynatrac pro rock high pinion 60s dynalite axles (fluted axle tubes and drilled knuckles its a little much...) 4.88 and detroits
4.3L vortec that gets around good
700r4
atlas 5.0 (just did 5.0 gears from 3.0 gears so this should be fun... thanks to chaseman9 i believe is his name on here)
40s bfg krawlers
a solid mounted cooler in the back... (most important part)
fun little buggy im just gonna keep wheeling it as much as possible... and breaking it and fixing it and wheeling again...
buggy.jpg
 

Latest posts

Top