Recent content by skipnrocks

Got it all done. The bolt head did the trick, not much of a gap so I used a flanged head bolt and then put a punch jammed in there to keep it pushed into the crack and got them all out pretty quick without damage.

Ill try the bolt head idea. I did pull the metal sleeve out I could throw it in the freezer too and see if it helps thanks guys

I should have greased them for sure. I tried a round punch and it just cut into it. I was tired when I was working otherwise I would have done it different. But now just trying not to destroy the stupid things

I'm putting a new ls3 in my buggy. I am doing bushing mount instead of hard mount. I had to assemble the bushing mount (roughstuff specialties bushings in 2inch 1/4 Dom style). To check bolt location etc during mock-up and now I can't get the stupid things apart without damaging them. I have...

You like the 3.8 for a little lower gearing?

Haha. 5.13 gears

Looking at a new atlas with a new transmission. I going to run a 6l80e which has a 4:1 first gear. I'm just curious to give a balance of crawling vs wheel speed what do you guys like? I'm leaning towards 3.0.

Will do thanks.

Pulled the tcase this am. Upgrades include sight tube. Gm input reluctor ring adapter and speed sensor. Output speed sensor.

Atlas is a pass drop 2.72:1 4:1 10:1

Please text me if you have questions. My alerts don't always come through. 4066705322

This started off life as a 600hp dual carb hot rod build. I purchase it put in an atomic efi kit 2500 bucks. Converted it to a serpentine belt drive 300 bucks. Aluminum heads. Converted it to hydraulic roller with lunati kit and comp cam hardened push rods 1100 bucks. Put a gm performance...

I got a set off eBay

I purchased a razor that had been converted over to four point harnesses in the back seats. The guy took out the lower buckle but left the upper seatbelt. I just need a pair of the lower buckle if anybody has one they don't need

I use carriage bolts in one rig, 1/4in steel plate, and countersunk on my other with 1/4 stainless. Love the carriage bolts for taking it on and off, never hung up on them. Like the countersunk cause there is nothing to grab onto but not as easy to take off.