• Help Support Hardline Crawlers :

October 1-4 Harlan Memorial Ride

Buggy is half-ass back together. Put my leave request in today.

Unless the 4L60e shits the bed on me in the KY mountains, I'll be there.
You should really put a hitch on the back of the buggy for the day when that happens. That way you just flip the two and keep cruising
 
Not a bad idea. I really just need to buy me a 1 ton tundra TBH
It tows better than that Chevy all day every day. Not a stab at your truck. Just chevy 1500's in general. I had one. And I'll never have another.
 
AT&T customers should do fairly well there in most places even down lower like rail bed trail and lower rock garden area. Virison customers will more than likely have to be at the playground area level or middle rock garden, there service is definitely not as good now for some reason
 
AT&T customers should do fairly well there in most places even down lower like rail bed trail and lower rock garden area. Virison customers will more than likely have to be at the playground area level or middle rock garden, there service is definitely not as good now for some reason
We went a couple weeks ago. My Verizon phone did surprisingly well. I was honestly thinking it was the best service out of most of the parks I've been to.
 
We removed the engine, trans and seats last night. Hopefully get the seats back in today. The parts I needed for the install haven't shown up yet, so we can't toss it back in. I may get a shakedown run in before October.
 
We went a couple weeks ago. My Verizon phone did surprisingly well. I was honestly thinking it was the best service out of most of the parks I've been to.
I am glad it has gotten better it's makes it so much easier for everyone
 
X
 

Attachments

  • 2BA8B82E-2853-4E38-BD42-11719224C9D5.jpeg
    2BA8B82E-2853-4E38-BD42-11719224C9D5.jpeg
    1.5 MB · Views: 222
  • 14795CC5-993B-4A2D-B4DD-A49999873CD0.jpeg
    14795CC5-993B-4A2D-B4DD-A49999873CD0.jpeg
    1.2 MB · Views: 233
Pass seat mounts are in in Kel's samy. Good time in the shop with Glen.

Waiting on parts now and we're doing round 2 soon.
 
Now I have tires and this pretty box. Need to get out of bed and go toss some of these parts on.
C640B9D6-6D18-4CBA-892B-58C37D662CA1.jpeg
1D9976E8-8297-489B-8D7B-A8AD82255FCE.jpeg
C640B9D6-6D18-4CBA-892B-58C37D662CA1.jpeg
1D9976E8-8297-489B-8D7B-A8AD82255FCE.jpeg
 
Hop to it! About 25 days to go.
Tomorrow is my work day. I'm not too worried at this point. If I'm in the same spot two weeks from now, the worry will settle in. I'm going back and forth on steel wheels instead of aluminum bead locks. I just don't see the need for bead locks with red labels
 
Tomorrow is my work day. I'm not too worried at this point. If I'm in the same spot two weeks from now, the worry will settle in. I'm going back and forth on steel wheels instead of aluminum bead locks. I just don't see the need for bead locks with red labels
You could get steelies for now and add the diy beadlock rings later if you feel like you need them.
 
I have wheels with no tires on them, but that shall change this week. Engine in, trans, x-fer case in. Seat lowered, new radiator and fan. Other stuff. But and bolt check before weeks end and a test run at Stony this coming Sunday.


Anyone have a place to sleep? I am easy to please, just as long as its not the small spoon. I have dollars and a few sense.
 
And here's the base frequency
 

Attachments

  • 7DFB4392-056C-46BA-9723-514271C87BA6.jpeg
    7DFB4392-056C-46BA-9723-514271C87BA6.jpeg
    378.7 KB · Views: 209
Top