• Help Support Hardline Crawlers :

What chassis would you run

Trying to decide if I want to get a premade chassis...been looking at the responses to this thread. When I goggled "PCR" or 'PCR Chassis" only thing that came up were chassis for Remington 700 series rifles. Uhmmm...so who is PCR ?
 
Trying to decide if I want to get a premade chassis...been looking at the responses to this thread. When I goggled "PCR" or 'PCR Chassis" only thing that came up were chassis for Remington 700 series rifles. Uhmmm...so who is PCR ?
Partially Committed Racing. @slravenel and @highgearonly are the member names.

Build thread for one buggy:

Some discussion about their chassis starting around post #66:
 
Last edited:
Trying to decide if I want to get a premade chassis...been looking at the responses to this thread. When I goggled "PCR" or 'PCR Chassis" only thing that came up were chassis for Remington 700 series rifles. Uhmmm...so who is PCR ?
if you have instagram they have a bunch of photos on there.
 
Trying to decide if I want to get a premade chassis...been looking at the responses to this thread. When I goggled "PCR" or 'PCR Chassis" only thing that came up were chassis for Remington 700 series rifles. Uhmmm...so who is PCR ?

if you don't social media, I can get some pics sent to ya.
 
My next one will be reject fab or iron duck more than likely. I have rode with a few pcr buggies and they are nice. My angryfab is built solid, but there's several things that I don't care for, on how he does them.
 
My next one will be reject fab or iron duck more than likely. I have rode with a few pcr buggies and they are nice. My angryfab is built solid, but there's several things that I don't care for, on how he does them.
I sent Iron duck a message and he said he will start building customer chassis in the spring. I am going to wheel mine for a while and then see what parts I want to carry over to a new build. Looking like I will keep my motor, trans, transfer case, shocks. Sell the chassis and axles depending on the chassis.
 
I sent Iron duck a message and he said he will start building customer chassis in the spring. I am going to wheel mine for a while and then see what parts I want to carry over to a new build. Looking like I will keep my motor, trans, transfer case, shocks. Sell the chassis and axles depending on the chassis.
I've started trying to collecting a few parts here and there, and when I get enough to get started I'm going to get a chassis. Gonna try and keep mine as long as I can, until I need a big chunk of money. I know now that I want to do a 4L80, SCS, rear steer and trailing arms on the next one
 
I've started trying to collecting a few parts here and there, and when I get enough to get started I'm going to get a chassis. Gonna try and keep mine as long as I can, until I need a big chunk of money. I know now that I want to do a 4L80, SCS, rear steer and trailing arms on the next one
If there was a way to get WOD to make a Rev chassis be able to accept 16 inch front shocks a lot of bouncer guys might switch over to them I would bet.
 
If there was a way to get WOD to make a Rev chassis be able to accept 16 inch front shocks a lot of bouncer guys might switch over to them I would bet.
That's a lot of the reason I haven't been looking at a wod much. Ever one I have been around, seem like they ride just a couple of inches of the bump stops. So you end riding on the bumps, more than the shocks
 
The new gen WOD (same one that Wes Kean drove) seemed to do good in the suspension department.
 
The new gen WOD (same one that Wes Kean drove) seemed to do good in the suspension department.
His does seem good, I figured they did some one off design for it. I would like to see it in person to get a better look at the setup it has. I thought it was the bouncer x chassis, but if you look at Wes's and the bouncer x chassis, they are different
 
That's a lot of the reason I haven't been looking at a wod much. Ever one I have been around, seem like they ride just a couple of inches of the bump stops. So you end riding on the bumps, more than the shocks

That's because most of the WOD chassis out there are the rockbouncer chassis which make a lot of trade offs for looks IMO. I have 2.5 16" shocks at both ends and 8" up/down on my Revolution. Their best chassis hands down is the Rev 2.0 but it isn't that popular because #bounceislyfe.
 
That's because most of the WOD chassis out there are the rockbouncer chassis which make a lot of trade offs for looks IMO. I have 2.5 16" shocks at both ends and 8" up/down on my Revolution. Their best chassis hands down is the Rev 2.0 but it isn't that popular because #bounceislyfe.
I like the look of the rev 2.0, but I haven't really got to check one out real good. There is 2 guys around here that have the evolution chassis, and I have looked at a few of the bouncer chassis. I love/hate my angryfab, my biggest complaints are things that, I should have said something about it when I got the chassis built. Like the engine,trans, tcase were mounted so low, that all the belly tubes had to be cut in half and plated just to clear oil and trans pan. And I wanted to be able to run descent size mufflers, but I could only fit those little race mufflers, and to get around tcase, I had to go from 3" down to 2.5".
 
That's because most of the WOD chassis out there are the rockbouncer chassis which make a lot of trade offs for looks IMO. I have 2.5 16" shocks at both ends and 8" up/down on my Revolution. Their best chassis hands down


is the Rev 2.0 but it isn't that popular because #bounceislyfe.

How can you not love the looks of Kevins trail rig!
1631191996768.png

1631192029720.png
 
My next one will be reject fab or iron duck more than likely. I have rode with a few pcr buggies and they are nice. My angryfab is built solid, but there's several things that I don't care for, on how he does them.
that's how I felt about my AF buggy.. they're solid for sure but lacking somewhat in the ergonomics department
 
How can you not love the looks of Kevins trail rig!

Oh you're preaching to the choir. I don't care for the bouncer look at all, regardless of what brand of chassis it is. That just seems to be what people are buying though because it is what is all over the facetubemygrambustedmooseknuckletv
 

Latest posts

Top