• Help Support Hardline Crawlers :

Search results

  1. P

    Superduty axles

    I am looking for a stub shaft for 99-04 and 05+ SD60s. It can have twisted splines or bent/broken ears. Mostly need it for measurements and mockup. Thanks Ben
  2. P

    Sold/Expired Dana 60 Detroit Locker

    I have a Detroit for a Dana 60 for sale. It was mocked up in a housing but never ran. 35 spline. Based on the casting numbers and carrier offset measurement (2.319") it is a series 4 carrier. 4.56 gears & up. $450 Also have an install kit for a dana 60. Koyo bearings. carrier bearings...
  3. P

    Sold/Expired 39.5 TSLs on H1s

    I am going to a different tire on my rig, and need to move these along. These tires are basically new and do not leak down. 4 - 39.5" TSLs 95% tread. Basically new, been on 3 trail rides. No cuts or holes. Mounted on 12bolt H1 double beadlock. 5x5.5 pattern, pressed centers, rock rings. $2000...
  4. P

    Coal vs Pellet Grills

    I'm looking to get a new grill and recall a number of y'all be knowledgeable on them. Have been mainly looking at Kamado style grills, but recently thought about entertaining a pellet cooker if it makes sense. Wanting something that's easy to get up to temp, maintains well, and last a long...
  5. P

    Sold/Expired zuk buggy part out

    95 tracker, no title Internal cage, tubed front. 1.5" 0.120 with some 0.95 bracing. Backhalf and Boatside started. Brackets for 3/4 link front and 4 link rear. $1500 1.6 8v log manifold (turbo). $100 2 - PRP Premier +2" wide suspension seats. Like new, 1 spot on back on 1. $600 2.5x8 hydro...
  6. P

    Sold/Expired Zuk buggy project

    Some things have changed and I need to part with my buggy project. 95 tracker, no title -1.6l 8v, 40mm harley carb, elec fuel pump, MSD reg -5spd, stock tcase twin stick and 2lo -Internal cage, tubed front. 1.5" 0.120 with some 0.95 bracing. Backhalf and Boatside started. -3link front, 4...
  7. P

    Sold/Expired Ford spindle

    Looking for a spindle for a ford dana 60/50. Looking for something cheap/free. Broken or bent is likely ok. Also be interested in a chevy/dodge version if someone has one of them. TIA Ben
  8. P

    Sold/Expired Superduty unit bearing

    Looking for a superduty unit bearing. Prefer 05+ but will consider 99-04. Cheap/free is preferred. Can likely use one that is worn out/broken. TIA Ben
  9. P

    Unit Bearing on kingpin knuckle

    I know many of you will think this is crazy, but just humor me for the sake of discussion and possible tech. Has anyone ever put unit bearings on a kingpin dana 60 knuckle? I'm thinking something like superduty bearing assembly on a Ford or Chevy knuckle. I know that you can use the...
  10. P

    Skid Plates

    I have searched without much luck. I'm curious about what ppl are using for belly skids on lighter rigs? My rig should be ~2500lbs when complete. I have always used 1/4" plate on bigger rigs and feel like 1/4" steel is likely overkill and a ton of weight for this one. The skid will be...
  11. P

    Sold/Expired 9" axles for trade

    Project is changing directions slightly and thought I might looking at selling/trading my axles. Front is 609, pass drop, ~63" wms, truss link brackets. LP 9" 3rd w/ 6.50 gears, spool, pinion gaurd. 31 spline chromo inners, d60 30 spline outers, new Spicer joints. Ford kingpin knuckles...
  12. P

    Overtired Kick

    Im not much of a build thread guy, mainly because I build at turtle speed, and change my mind daily. I figured I would throw up my zuk build since there were some others here that could offer advice. I picked up a tracker a few years ago, and wheeled it basically stock. The plans were to...
  13. P

    Sold/Expired 19' Deckover Gooseneck

    I have a deckover Gooseneck trailer that I am not in need of anymore, and would like to trade it for another trailer. I am open to another gooseneck or tag along, must be atleast 20' long, but doesnt need to be deckover. Also would like a 18+ foot enclosed. Here are some specs of my trailer...
  14. P

    FS: Rhino plastic, NC

    Yamaha Rhino ('07, 660) Plastics. Hood, cowl, rear fenders. Have been rhino lined. Small crack in RR fender corner. $350 Located in Newton, NC Open to offers and trades.
  15. P

    Sold/Expired 305 Falken Wildpeaks

    I have a set of tires on my tow rig that i have been thinking of moving to get a taller tire. 4 - 305/70/16 LT Falken Wildpeak AT 90%+ tread left (<5k mi on them) Radial Load range E No cuts, rash, plugs, etc. $800 tires only. $1000 wheels & tires. Located in hickory, nc
  16. P

    Doe Mountain

    Saw this on nc4x4.
  17. P

    Sold/Expired 305 Falken Wildpeaks

    I have a set of tires on my tow rig that i have been thinking of moving to get a taller tire. 4 - 305/70/16 LT Falken Wildpeak AT 90%+ tread left (<5k mi on them) Radial Load range E No cuts, rash, plugs, etc. $800 tires only. Located in hickory, nc
  18. P

    Sold/Expired 37" Creepy Crawlers

    I have a set of creepy crawlers that i need to move. This deal will most likely only be around a short time so act soon if interested. 4 - 37x14.50x16LT Maxxis Creepy Crawlers ~95% tread. No rock rash, cuts, plugs. Currently mounted on 16x8 black steel streetlocks, 5x5.5 $1100 tires only...
  19. P

    Manual steering and full hydro

    I know this is not the norm here, but i am building an offroad rig that can also be driven quite a bit on the street by the wife. With that being said i am trying to figure out what to do for steering. I know that std power steering isn't going to cut it offroad, and haven't ever been...
  20. P

    Sold/Expired 37" Creepy Crawlers

    I found another set of tires that i want, so putting these up for sale. 4 -37"x14.5"x16" Maxxis Creepy Crawlers 95% tread. Only 3 trail rides, no highway miles. No cuts or major chunks. $1100. Only trades might be 35" tow rig tires/wheels, or partial trades on 37" military tires on beadlocks...

Latest posts

Top