Search results for query: *

  1. T

    Another Tri-Cities Rockcrawl- now with shotcrete

    Hey guys, figured I would pass on the word that another competition is coming up. Im not affliated with the promoter but I figured I would pass the word on. I have been told by a reliable source that this time the rock crawl course will be constructed with shotcrete, which should be...
  2. T

    Tri-Cities Comp Nov. 7th

    Does anyone have any information on this event? I have heard from several people that there is a rock crawl Sat the 7th, but nobody has a flyer or anything. Supposedly it will be a man made course?
  3. T

    Dana 60 wheel hub/ drive flange problem

    I have Chevy front dana 60 wheel hubs that do not have the retaining ring groove machined after the internal splines, do I need to machine the groove to run my flanges? I have summit machine 35 spline flanges. Also, is the internal spring (like the one included with longfield drive flanges)...
  4. T

    Dana 60 High steer/ full hydro questions

    What kind of high steer arms are you guys running with full hydro? I was thinking of using the basic style with the bolt on spicer cap. What about Ackerman or geometry? I have a double ended 10" ram (will be de-stroked) if it matters. What about the short tie-rods from the arms to the cylinder...
  5. T

    Check my axle math

    I am narrowing a chevy Dana 60 to toyota spring pad width. The toyota spring pins are 29.0" apart, and the chevy spring pads are 31.5" by my measurement. I want to use a dodge shortside axle (1.5" shorter) and a custom long side, 3.0" shorter. So 4.5" narrower total? Just making sure I am not...
  6. T

    Toyota t-case carnage

    Last weekend went snow wheelin and had a great time, until the end. Broke the low range gear in my rear case and the case itself. A tooth broke off and floated around for a while, then got sucked up into the gears and broke the case. Stock gears in both cases, 4.3, auto, 4:10 gears and 44 TSL's...
  7. T

    Where can I buy 3.125" 4130 tubing?

    Ive checked online metals and a few other sources, but they want me to buy a 20ft stick ($$$). I am looking for 3.125" O.D. .188 or .250 wall tubing to retube a Dana 60. Any ideas?
  8. T

    Dana 60 6.17 gear strength?

    What kind of luck are people having with the higher Dana 60 gear ratios? I was considering either 5.86 or 6.17, but I dont want to break ring and pinions. I have 35 spline yukons and drive flanges on order, I would prefer to keep the weak point the shafts or joints.
  9. T

    Naches Saturday 9-27-08

    My roommate and I are headed up to the rocks Saturday morning to play around, anybody going to be up there? If there is anybody from Ellensburg that wants to tag along we will be stopping at the Super 1 foods parking lot at 9:30 or so then unloading at Barber Springs Road. My roomate has a mild...
  10. T

    Air Filters

    Does anyone know a part number for a paper air filter with a 3.5" inlet and flange for a hose clamp? Or somewhere where I can order one? I was using a K&N but it lets too much dirt in. I looked through all the boxes at shucks and napa but there werent any filters with a place for hose clamp. A...
  11. T

    Suppose you were going to build a 60...

    Would you do it the same way as before? I am bored and need a project. I am thinking its kind of silly to buy a sixty for 900 and not use the brakes, shafts, hubs, steering, gears, carrier, diff cover, or yoke. I have also been thinking about retubing a newer superduty axle as some of them come...
  12. T

    Reiter Memorial Day pics

    Went to Reiter for the second time and camped and wheeled, had an awesome time. I got a few pictures but alot were blurry. Saw alot of rigs I recognized from the board. We ran most of the trails, there were broke cherokees on almost every one :flipoff: My carnage: oil filter motor trans pan...
  13. T

    First to the funnyrocks?

    Dickwart and I made a run up to funnyrocks and moonrocks yesterday, it dumped snow the whole time. I had never been up there with that much snow before, it was kinda of fun rallying around where you usually can only just creep along. Here are the pics I got: Funnyrocks Brad and Berto by the...
  14. T

    Ellensburg wheelin saturday Feb 16th

    Dickwart and I are going snow wheelin tomorrow up wilson creek road, we are meeting at wilson creek road where the pavement ends and the gravel road at the base of the hill begins. The catch is Berto has to be back early, so we are meeting out there at 8am. Since I am putting this post up kind...
  15. T

    Wheelin sunday 1-27 in Ellensburg

    Dickwart and I are going snow wheelin tomorrow in thorp (about 15min outside ellensburg) tomorrow, meeting at his house at 10am. I havent been out to this spot before but I would suggest you have at least 33's and one locker or be prepared to do alot of digging. That being said I can PM you my...
  16. T

    Snow wheelin in ellensburg Sunday

    Some buddies and I are planning on heading up wilson creek road here in ellensburg to do some snow wheeling on sunday (the 20th). I am pretty well setup but there are some smaller guys with only one locker and 31's. Anybody is welcome to join us but be able to handle yourself. Should me more...
  17. T

    Did some work over the break...

    Got a chance to do a bunch of work on my rig over the break, still lots to do but getting there. Tons of snow in ellensburg last couple of days has been getting me way too excited for snow wheelin. New paint, half doors, tailgate, seats. Still need to bolt my doors closed, there is no hope for...
  18. T

    TH350 to 02' vortec 4.3 questions?

    Is there any way to eliminate the kickdown cable and still have it kickdown in 2nd/ 3rd? Without a full manual valvebody? Why does a th350 have a cable and a th400 doesnt? It looks like my flexplate is a 11.5" or so converter pattern, and th350 is 10.75"? Is there another stock flexplate that...
  19. T

    Moonrocks/ Funnyrocks Oct 6th

    A couple of us are going up to play on the rocks saturday, some mild rigs some built. Anyone is welcome to tag along. We will be coming up from the ellensburg side, going to meet at Super 1 foods at 9:00AM and decide which route to go up from there. Look for a red Land Rover and a trailered...
  20. T

    Tri Citys run Saturday night sept 13th

    A few buddies and I are going to hit a local trail Saturday night about 7pm. We are going to the rock canyons off of Ayers road in Finley. This is about a half hour from kennewick if you havent been. We meet at the gas station in finley and go from there. Dont bother showing up if you dont have...

Latest posts

Back
Top