Search results for query: *

Have a set of (4) Raceline Monsters in a 17” flavor for 6-lug for sale. Black finish with aluminum rings. One has had a tire mounted for mockup, but it’s hard to tell by looking at it. All are in original boxes with original shipping packaging. Comes with extra inserts and hardware. Backspace is...

I saw this was posted in another thread here but thought it pertinent to start a new thread with a little more detail. Green Acres in Clayton, Oklahoma, has a long history of hardcore wheeling with excellent traction. In the few years past, it has also been very difficult to drill down to...

2001 Lance 835 - 8'6" Slide-In Camper - $4000 Been doing a lot of shuffling with tow vehicles and setups lately. Bought this camper a couple months ago with intentions of towing my rig behind with it in the bed. Finally got a chance to tow with my new-to-me tow rig a couple weeks ago, and I...

Selling a set of (5) Super Swamper Boggers in the 42.5x13.5/20 flavor. These came off a strictly street driven JK Wrangler, so no rock rash. They’re worn more in the centers than the outlets. Four tires at roughly 75%, and the fifth tire has never seen pavement and still has the molding nubs...

Definitely a long shot, but maybe in some corner of the world there is a 23-spline input for a Stak transfer case. I have a passenger drop 2-speed regular (not B-box, or whatever) transfer case. Currently has 32-spline input and was behind a TH400. Kicking around dropping it into my Toy-based...

I have an orbital that needs to be rebuilt. It's an older PSC unit, but PSC has been zero help in figuring out who made the valve and getting a rebuild kit. I know it's a 125cc open-center load-reactive valve with PSC part number FH-SV 125/3 Housing has "LS" cast in to it like friend's...

Selling a Warn RC9.0 short-drum "competition" winch. Winch is in good condition but has a few chips out of the paint and some surface rust on the drum. Will sand and spray paint the drum black if that's a deal breaker. Comes with a good synthetic rope with tube thimble and hook from Winchline...

Selling a set of (5) BFGoodrich KR2 stickies (KR2-S). They have about 85% tread on all. One has been vulcanized and patched but works excellent as a spare. Bought these a few months ago to run on a Toyota-based truggy to replace a set of 39" red labels. Unfortunately, these tires are too wide...

My 39" reds are getting close to the end of their life cycle, or I'm looking for a change - haven't completely decided which is the case. I have a chance to buy for a decent price a set of 85% KR2 stickies. I'm hesitant to pull the trigger because I can't find any feedback on how they do in a...

I have two of these military trucks for sale. Neither have axles. Both have 6.2 diesels, neither run. Mainly just parts trucks. See ad for more details. Located in Hot Springs, AR Asking $250 for white truck, $500 for red truck sans trans and transfer, or $750 with TH400 and NP208 currently...

Have a set of tons from an 05+ F250. Both open, both 3.73. Front is missing rotors and calipers. Could use consumables - unit bearings and balljoints, or just freshen up the UBs. 35-spline stock lockouts. Comes with factory radius arms. Rear is missing a soft line to a caliper, but that's it...

The time has come to move on to other things, so my Land Cruiser is for sale. Specs: - '93 Forest Green - 256k on clock, has "lower miles" engine, I believe - 4.88 gears w/ factory elockers - Longfield birfs with stock inners - ARP hub studs front and rear (rear have 0 miles on them -...

Thinning my stash, so up for sale is a CUCV Chevy D60 front axle w/ 4.56s, stock shafts, but a full-case Detroit. Has Royal Purple synthetic in the diff, so that's worth a million bucks... laughing1 Axle is located in Hot Springs, AR, so pick it up when you're in town for SRRS Finals the first...

This is the big, bad SuperDuty HPD60 with larger tubes, massive knuckles, huge u-joints, 35-spline inner AND outer shafts, and locking hubs. Dale Larsen runs this in the front of his bouncer (with RCVs, of course), and it seems to hold up quite well for the insane beat downs he dishes out. The...

Have a R151F Turbo 5-Speed out of an 86-87 truck for sale. I used it in my rock crawler for a few years before I parted out the truck. Time to move it on to someone else. Will come with Shifter and complete from bellhousing to tailhousing. In good shape when parked. Will make sure it's good...

I have a mid-90s HP D60 from a Ford F350 SRW. The hubs have been converted to 5 on 5.5" by a professional machine shop, complete with brazing the old holes that interfered with the new pattern and turning hubs to accept wheels with 4.25" center bore. The rotors are from a Dodge but drilled to...

I did some trading and ended up with these tires. They were a friend of mine's, and I've seen them firsthand hook up unlike any iRok. Kinda boggles my mind... Anyway... they're bias-ply 37x14.5/15 iRoks with ~75% tread in the middle and the typical rounded outer lugs. The wheels are DIY...

Have a set of (4) 37" Reds that are in like-new condition. 95%+ tread with outermost lugs just barely rounded. Centers are maybe 1/64th worn off new (I have a brand new 37" red to compare to - not just grasping at thin air). These are too nice for the beat-up Cruizer I drive, and I have too many...

How has this not already been ripped up by HL :dunno: http://www.gofundme.com/rockbouncerdream

I have a set of DOT Treps that have been grooved. The outer lugs transitioning to the sidewalls are up to 1.5" deep. The middle is 19/32nds on average. You'll notice some of the pics in the album are from before the groove job. The idea was to remove some rubber to create voids for the lugs to...