Search results for query: *

I’ve got a new I’m box DewAlt cordless ratchet for sale. I used it once and it’s handy, but I don’t turn wrenches enough to need it. Retails for $198 on Amazon; I’ll take $100 Prefer not to ship. Located In Murfreesboro, tn

I’ve got 2 Fox 980-02-801 bumps without cans. Brand new. I got a deal on them so not returning them to vendor. They are freaking huge and way too nice for my rig, plus we are about to break ground on building a house and freed up funds is better than parts I don’t have time to install and will...

What’s the difference in a $1000 Eaton from psc, a $600 trail gear, and a $274 chinesium? Backstory: I’m hoping some smarter than me can shed some light on the quality differences in orbitals. I had a trail gear system with their pump and some old nascar reservoir. It would act like the fluid...

So 10+ years back I built this rig: It had Nissan/spidertrax/14 bolt axles (like hybrid 9s but for ghetto fab Nissan fan boys like me), 22r on propane, 4 links, and about 6 wires to make it all run. We had just bought a house and I didn’t have any money to keep dumping into it so it was parted...

I’m adding a 205 behind a Nissan range box using an nwf adapter. It’s going in a box frame pathfinder behind a stock v6 on stock mounts and a 5 speed. Current (stock) setup has a mount in the middle of the transmission. I’m thinking I should ditch that one and run a mount at the doubler...

39.5 pitbull rockers good tread, one is cut but I’ve been told by a few people it can be vulcanized. Pitbull wanted $600 to ship another so I jumped up to stickies. $750, Murfreesboro, TN Wheels can be bought too, but two are 8 on 170 and 2 are 8 on 6.5 (don’t blame me, I bought a rig to part...

1995 Nissan Pathfinder XE V6 (reman engine with less than 5k miles) 5 speed 3.96:1 Calmini geared transfer case 99-04 Dana 60 front axle (chromos, 35 spline outers, drive flanges, 5.38 gears, welded, ruffstuff cover) 14 bolt rear axle (stock shafts, welded, discs, tmr cover, lightly shaved)...

Looking for experiences with wishbone upper links. Packaging a traditional 4 link is about impossible with the oil pan, and I am not a huge fan of a typical panhard 3 link, although I can do it. Rig has 40s and while I’d like to think it might bouncerer, it’s more of a leaf looking rig. My...

My wife and I have 3 kids and wheel a Nissan Pathfinder. It’s a little narrower and shorter than a 4Runner. I’m looking at UTV seats. I’m thinking about a rear bench or buckets and bump seat up front. Anybody have experience with these seats? Before the wise cracks start, I had the flow...

I’ve had this rig for 5 years and in that time I’ve camped out of it once and wheeled it 3 times. It’s time to let someone have it that will use it. When I bought it, it was street legal and I actually drove it regularly. I bought the discount Datsun project later and robbed the 1 tons, full...

Sold

I’ve got an M1101 in Murfreesboro, TN for sale.

Definitely a long shot, but anyone want a roof rack? It came off the top of the pathfinder built on Xtreme a few years back. It's got 4 IPF lights still attached that work. $100 OBO I have no idea what it's actually worth, just want it out of the way. Located in Murfreesboro, TN

I'm wondering what guys with little jap trucks with stock fuel injected motors do about exhaust. I have a 22 year old pathfinder with clogged stock cats and need to redo my exhaust. I'm just wondering if I should bother putting a cheap replacement or high flow catalytic converter on or not. It's...

I have a welded front end and drive flanges so my rig is worthless on road with the flanges in. Before I throw down $150 for some Milemarker hubs from amazon I figured I'd see if anybody had some shelved in their shop. Don't have to be perfect, I'll be throwing the flanges in for wheelin trips...

I have a set of 1/2 axles I just pulled from my pathfinder. Front: 1995 ram 1500 Dana 44, narrowed 4:88 Yukon gears Eaton E locker 4340 inner and outer shafts (inners are 78-79 ford length I believe) Free spin hub kit Thick diff cover (not sure what brand) Rear: 1995 ram 1500 9.25 rear...

I believe this is PSC's old style reservoir. I see their current one sells for $175; I'd like to see $100 OBO on this. I don't know what the hell is fair; make me an offer. 615 987 8152 located in Murfreesboro, TN

2 .25 wall 40.5" 2 .25 wall 33.5" 2 .125 wall 35" 1 .125 wall 34.5" 1 .125 wall 33" I'd like to get $50 per link OBO; the joints and links only have one easy ride on them and Barnes charges $30+ per joint set. They're all 1.75" OD. Located in Murfreesboro, Tn. 615 987 8152 Oh, and I know...

I have a pretty much brand new TG 10k winch with a used 5/16" warn cable. I think it was used once as a suck down winch and once for me to spool it up with new (old) cable. They retail for $419 with new steel cable; I'd like to get $250 OBO. My number is 615 987 8152. Located in Murfreesboro...

I have 4 pretty much brand new Fox air shocks. They have less than one day of riding on them. Obviously I need to pull and clean them. I'd like to see $800 for all 4 but will entertain offers; looks like they're $250 each new. My number is 615 987 8152. Located in Murfreesboro, TN