Search results for query: *

Alabama Senator Andrew Jones (RINO) had submitted SB254 which has potential to close private offroad parks in Alabama. This forces parks to have a $5 million liability policy which most could not afford to pay. https://www.facebook.com/ANDREWforALABAMA/

New never used F450 F550 SD front 2wd monotube axle assembly with Cs and knuckles. 2005 up. $450, Call or text Perry at 615-three88-zero444. Located in Lafayette, TN 37083

New triple disk billet Dacco HD1222-2 torque converter. Fits Allison 1000, 2000, and 2400. 1.63:1 stall/torque ratio for an Allison transmission to Cummins engine. If used behind a Duramax engine the stall would be lower than stock. Does not work in a Dodge Ram transmission. $525. Call or text...

Never used Ballistic Fabrication 14 bolt shave kit for 10.5" rear axle. Includes the bracket to weld to the truss as shown in the photo. You will need to supply standard or metric cover bolts depending on the year of your 14 bolt. Does not fit the 9.5" semi float rear. $275. Call or text...

2009 Wrangler 4x4 automatic transmission. Has slightly over 170k miles. Shifts good. I removed it to do a LS swap. Torque converter is painted blue so I assume it had a rebuilt converter installed at some point. The fluid is dark but doesn't smell burned. I attached a photo of the fluid next to...

Need a 07-10 model. JK Wrangler Passenger Airbag. Six15-three88-zero444

1997 Pace Shadow enclosed gooseneck with bathroom, microwave, and 110v refrigerator. A/C unit in living quarters. Can be pulled with a short bed truck. Has Onan 6.5 generator and 50 amp hookup for RV parks with 50' cord. Has a 50 gallon fresh water tank with a 12 volt pump and a city water hose...

They seem to be getting more popular. Someone should start making "poundsign Unich Life" or "Rolling Neutered" stickers for the windshield and back glass.

Anyone running an LS3 timing chain tensioner on their engine that has failed? I installed a C7R chain on the 402 that I am building using an iron block and the chain has slack. I can add the LS3 tensioner or the LS2 dampener. The tensioner would be better but I have read that several have failed...

2007 Powerwagon. SOLD

Looking for a headliner board to fit a 2006 crew cab with sunroof. Condition of cloth is not important as long as the board is good. 615-388-04 four four.

Sold...Thanks Hardline. Four tires in good condition on 2010 Silverado wheels with lugs and caps. Load range E 80psi. 9/32 is lowest measurement of tread depth. Wheel finish has some salt pitting. $300.

Wide Open Design Evolution bare chassis. Fully welded except door bars are spotted in place for easier interior build. Located in Lebanon TN. $4000obo cash, no trades. Listing this for a friend so for all information call Todd at 615-866-.

Interested in a big 10 lug pattern 4.11 rear axle with hydraulic disc brakes from a medium duty truck or bus. Buy or trade a Chevy Dana 60 front axle for it.

5 foot Kenworth truck sleeper. Mounts with studs after drilling 4 holes in trailer floor. Can be removed or installed in about 20 minutes using included rolling stands and your floor jack. Locking RV door. Plenty of storage beneath and shelves on the inside. Has 110 outlets. I used a small $25...

Need one or two of the 17x9.5 wheels with 8 on 6.5 and 3.5 back space.

39.5 TSLs on 15x8 steel wheels with weld-on beadlocks. 4.5" backspace 8 on 6.5" pattern. Tires are in good condition. Two wheels have not been run and the other two have been run one season. Will not separate. $1200 615-388-0444 LafayetteTN. sold.

I usually build all of my junk including tow rigs and the family's daily drivers. I planned on building my own chassis but when I saw the Evolution chassis in person I knew my tube work would never look that good so I had to have one. Most all of the parts will be bought from WOD. It has a...

1987 Samurai, 1.6 EFI, A/T, dual cases, 5.13 geared D44s, full Detroit lockers, 33 spline Dutchman rear axles, 4 link rear, 3 link front, 1.25” Johnny Joints and 2”x ¼” wall DOM links, 14” front and 16” rear King air shocks custom valved by Downsouth Motorsports, 104” wheelbase, 4...