• Help Support Hardline Crawlers :

Search results for query: *

  • Users: Weezul
  • Content: Threads
  • Order by date
  1. W

    Rambo at Hawk Pride

    Saw a video of this new trail. Where is it located at in the park?
  2. W

    2005+ Dana 60 front axle

    05+ Ford Dana 60 front axle. Unsure of exact year and mileage. Located in Memphis, TN $800 obo
  3. W

    JK Dana 44 diff covers

    Dana 44 diff covers off a 2016 JK Rubicon. $150 OBO. Located in Memphis, TN. Prefer not to ship but can on buyers dime.
  4. W

    Metalcloak lift on 2 door JK

    Recently helped a friend install a Metalcloak 3.5" Gamechanger with the short arms with Rocksport shocks. Arms are adjusted to Metalcloak specs. Was on a trip to Hot Springs and on climbs the front end unloads and picks a tire. Tried to keep crawling and it just kept picking it up even higher...
  5. W

    Front axle truss opinion

    I'll be starting a build this winter on a new front axle for the TJ. I've got a list of what I know I want but I'm down to trusses. First thought was Artec but TNT has one as well. The TNT has the option to adjust the coil buckets for 1.5" stretch. Artec doesn't but I was planning to modify...
  6. W

    Line Locks

    I've got a TJ with the 8.8 and the e-brake has always been terrible even when properly adjusted. Last time I had the shafts out I just took off all the e-brake hardware and threw it away. That being said, I'd like to have something when on the trails. Anyone using a line lock for an e-brake?
  7. W

    Jeep JK knuckles

    Looking for some JK knuckles. Anyone got any collecting dust?
  8. W

    Harnesses

    I currently have ProArmor 4 point harnesses. For those not familiar with them, the shoulder belts are attached to the lap belt. I've been thinking of going to harnesses where the shoulder belts are separate from the lap belt. What is everyone running?
  9. W

    05+ SD60 and 14 bolts SOLD

    05+ Superduty 60 that has the brackets cleaned off and the cast on the driver side trimmed for a truss. $700 obo 14 bolt axle (smooth housing): $200 obo 14 bolt axle (finned housing): $200 obo Located in Memphis, TN. Would be interested in a JK44 front axle.
  10. W

    14 bolt and Sterling 10.5

    Got 2 rear axles for sale. Neither of them have brakes but still have factory brackets. Located in Memphis, TN. 14 bolt ribbed housing: $200 2007 Sterling 10.5: $200
  11. W

    14 bolt rear axle

    Picked this up and decided I’m going to stick with the Sterling 10.5 rear for my build. I think it has 4.10s but the bearings are trash. Brakes have been removed. WMS-WMS is 65”. Located in Memphis, TN. $200
  12. W

    14 bolt parts

    Looking for a 14 bolt open carrier and SRW hubs.
  13. W

    14 bolt vs Sterling 10.5

    So I’m working on a set of tons for my Jeep TJ. I bought a pair of Superduty axles that were for sale on here. I also have a 14 bolt. I like the 8x6.5 bolt pattern compared to the 8x170 Ford pattern. Besides that, which one would be better? I’ve helped a friend build a 14 bolt so I’m fairly...
  14. W

    Super Duty 60 knuckles

    I’m in the process of building a Super Duty 60. I’m torn between the Artec brackets or having the knuckles machined for high steer arms. Opinions? Link to each: https://www.artecindustries.com/SD_Xover_HSarms_Weld_on...
  15. W

    1998 Jeep TJ

    Located in Memphis, TN. $14,000 obo or interested in a trade for an early model 2 door JK Rubicon. 1998 TJ 4.0L (clean title) 3 speed auto NP231 w/ Super Short SYE, 2low, and Savvy cable shifter HP30 with RCV and Yukon Grizzly locker 8.8 with c-clip eliminator kit and Detroit locker 4.56 gears...
  16. W

    Fuel Cells

    For a few years now I've just been running my stock TJ gas tank behind my front seats. I'm considering changing the cage up to be able to add a Corbeau bench seat and therefore I'd need a fuel cell. What's a good option? Wanting to keep it around 15 gallons if possible, no less than 10...
  17. W

    Another "what's it worth" thread

    1998 TJ 4.0L with 177k 3 speed auto NP231 w/ Super Short SYE, 2low, and Savvy cable shifter HP30 with RCV and Yukon Grizzly locker 8.8 with c-clip eliminator kit and Detroit locker 4.56 gears Stretched to 103” wheelbase 36” TSL/SX on 17” Racelines (spare is brand new) OR-Fab front cage kit/rear...
  18. W

    TNT Customs tube fenders for TJ

    TNT Customs Phantom tube fenders. Nothing wrong with them. Just wanting to go to a highline fender. $450 located in Memphis, TN. Sent from my iPhone using Tapatalk
  19. W

    Detroit locker question

    Does anyone know the length and thread size for the bolts that hold the Detroit together for a Ford 8.8? I’ve searched online and talked to Eaton and can’t find it. Sent from my iPhone using Tapatalk
  20. W

    Super 8.8 question

    I’ve been running this kit awhile and have a leak on the passenger side. It appears to be where the seal and axle shaft make contact. I’ve tried 2 different seals and checked the shaft for any wear in that area and it’s fine. I’m not sure why this would leak. The driver side has never leaked. Is...

Latest posts

Top