Search results for query: *

Holy ****....it's obvious I haven't purchased tires in a while. I have been researching tires/ pricing and I am a little shocked on how much they have jumped in price. That being said, who is a go to for tires these days that has reasonable prices ? I'd rather support a smaller shop than a...

I have three different 2Coil sets of springs for sale. All are 2.5" (for 2" coil overs) and are 14" long. Two sets are Eibach Springs and I think the third set (blue) may be as well but not certain. (blue) 300# (silver) 175# (red) 80# $125 per set shipped. If someone wants all three sets, then...

So, like many others have done, I have decided to sell my dedicated crawler. Friends have gotten out of it, life taking a different direction, etc... are all reasons behind this decision. That being said, I still want to get out and enjoy the outdoors...hence, the new project. I picked up a 1991...

Selling my 1995 YJ... https://www.hardlinecrawlers.com/threads/yj-build-just-a-little-different.52378/ 95 YJ with the 2.5L and RH30 (same as a 909) auto. Four link front and rear (Motobilt 4 link kit) Fox 2.0 14" Reso coilovers at both ends (tuned by Ryan @Accutune) Atlas 4.3 Diamond Axle Toyota...

I have a High Angle driveshaft (front/Toyota) for sale. The driveshaft is in excellent shape and has only been on the Jeep for about 150 miles, all on road. the only reason I am selling is due to me stretching the front end three inches, the shaft no longer fits. I was going to have it re-tubed...

I have the following for sale. 1. TMR Customs Ram mount. This kit is complete as shown. TMR list price is $189. I will take $175 for it and that includes shipping. 2. Hydro Assist ram(Redneck Ram)used. 6" stroke. $90 shipped. Parts are in Tallahassee,FL.

I need to get my front driveshaft lengthened three inches since I redid the front end of the Jeep. That being said, who is the go to person for driveshafts these days? I have used Jesse at High Angle before and have had excellent results but just wanted to see if there is another alternative...

I am getting ready to order my full hydro system. I spoke with PSC on the phone and the guy seemed annoyed that I called them instead of a distributer and literally spent less than 5 minutes talking to me. When I called Howe, the owner answered the phone and spent about 40 minutes giving me...

Hydro Assist Setup : Saginaw box from a 1995 YJ (will fit up to 2003 TJ) rebuilt and tapped by Redneck Ram in 2019 also has a Genright Offroad pitman arm. New pump with modifications to meet the flow needs of the hydro assist, Reservoir, 6 inch ram and all applicable hoses. Setup has less than...

Well...it's that time to do an engine swap. 1995 YJ with a 2.5L and RH30 transmission. Build thread is below. My goal is to get more power, keep costs down and not have to re-do to much of the existing fab work. www.hardlinecrawlers.com/threads/yj-build-just-a-little-different.52378/page-2...

I decided to put in a console style shifter in the YJ. The trans is a 30RH, which after doing some research and talking to a couple of transmission folks, I was advised it is pretty much a newer version of a 904. After installing the Winters shifter (which is cable activated) my shift pattern...

I need a recommendation for a small and quiet muffler for a Jeep 2.5L. Currently has a small round Dynomax muffler and it is ridiculously loud...as in very annoying...as in my Jeep sounds like the "white trash express". The room I have is limited as the muffler has to fit between the bottom of...

I will be running a sway bar (likely going with a TK1) on the Jeep. Specs are -95 YJ with 14"coilovers, 3 link front,4 link rear, 38 SX , custom Toyota axles and a 2.5L / Auto. Front coilovers are 80/175 and the rears are 80/85. Rig should weigh in around 2900 - 3100. Coilover springs are what...

I am going to need a sway bar for my Jeep project and I know there are other companies that sell kits other than Currie Enterprises. That being said, who has used a non Currie Enterprises setup and how has it held up and what is your opinion of it ?

I have ZERO affiliation with this person, saw it this morning while perusing the local craigslist. It might be a good deal for someone looking for coil overs. See link below. Mods, if I have put this in the wrong spot, feel free to move...

I need one 15x8 Allied Beadlock (RT81) with a 6 x 5x5.5 (Toyota) bolt pattern, that being said who here has the best deal out there ?

I received a call this evening that brought back good memories and also reminded me that life can be cut too short. Stephen Grogan wanted to be a Marine Officer and he worked very hard to accomplish that goal. He was always upbeat and never backed down from any of the physical challenges the...

Just curious what other simple yet time consuming issues others have run into during current or past builds. I'll start, so I am 6'2" and the wife is 5'2" and yes, she wants to drive the Jeep as well. Therefore, I have to install a slider on the driver seat and both seats will be mounted to the...

Happy Birthday to my fellow Marines....

In my last rig, I had a set of Mastercraft seats. They were comfortable and fit me nicely (6'2" 195). At the point where I need to order seats for the new rig and I can get a set of PRP Premier seats for $568 shipped and a set of Mastercrafts will be about $115 more. In comparing the two, the...