Search results for query: *

2014 XP 1000 for sale. ~1700 miles Racerteck a arms with new derlin bushings, hd radius rods, rhino axles front and rear, dirty dawg clutch kit, STI HD 5 wheels and 29" Bighorns. Bed delete, dom cage, bumpers and tmw doors. $11000 obo. Call or text Drew at 205-522-7868

Just throwing this out there to see if there's any interest. Chassis is 52" at the widest point. Setup for around a 110" - 118". I built it around me and I'm 6'4" so there's plenty of room for good seats and to be comfortable. Sub frame and rock sliders are 0.188 dom and the rest is 0.120 dom...

Posting this one up for my dad as well. It started out as a 2014 XP 1000 he bought new. It currently has 613 miles and 68 hours. Engine is stock other than a dirty dog clutch kit. Upgraded front drive shaft and a dc motorsports armature plate in the diff. Cobra axles in the rear and Rhinos in...

Posting this for my dad. I can answer just about any questions but I'll be listing his number. Started life as a 2013 xp 900. Currently has 208 hours and 1765 miles. Engine has the polaris stage 2 kit. Bikeman performance header and slp muffler. It also has a dirty dog clutch kit. The front...

Thinking about selling our single seater chassis. It was built in January 2015. Uses all XP 900 suspension and engine. Same wheelbase as a 1k rzr. Also uses 1000 front diff. Comes with the skins, seat, fuel cell, 3/16 aluminum skid plate, and the ducting for breathers to belt and engine. Pics...

Got too many projects going on so I'm thinking about selling this one. This is what is left of the old shityota. I bought it from Kel to put all the parts in the chassis I started. The chassis is all 1-3/4 .120 HREW. It's got 2x3 1/4" box tubing for the rock sliders and the rear cross member...

2 39.5" x 15 tsls and 2 39.5" x 18 boggers. I bought these for a project and it looks like I'm not going to be using them anytime soon. I'd say they are all between 50-75% tread. They have rock rash. On 15" steel bead locks. 8x6.5 bolt pattern. $1000 OBO for the tires and wheels. Best way to...

Just throwing this out there to see if there's any interest. I had plans on running it in my rig. Has factory chevy kingpin inner c's and 2x3 1/4 wall truss. This was a semi float rear and had 35 spline c clip shafts. The carrier is welded and has 3.55 gears. I'm sure it will need new bearings...

I have a pair of Fox 2.0 air shocks for sale. They came off of a rig but I have never used them. They are 14" travel and still charged up, don't know the pressures though. Don't have the spacers for the mounts. $300 OBO I can ship on your dime. Located in Cordova AL. Drew 205-522-7868

Thinking about selling my buggy. I finished it back in February 2010. Sold Drivetrain: 02 GM 5.3 with Jim's Performance harness and tune. Has truck intake, oil pan, and accessory drive. Custom headers and 2.5" exhaust with a single Magnaflow muffler. TH 400 transmission with stock converter...

Got a trip planned for windrock coming up. Never been and wondering what some places are that are good to stay at since the cabins are all booked.

Posting for lay. Any questions message him on here or call or text him at 205-388-9730. Chassis was built by Jimmy Smith and completed in June of 2012. It is .120 wall dom with some .188 in the main frame rails. Only 2 dented tubes one is on the shock hoop and the other is on the lower main...

Asking this for lay. On his motor he had all the breather and vacuum lines ran like they where supposed to be factory. Whenever it would get off camber it would start smoking pretty bad and then we had somebody (can't remember who it was) tell him that it would do that if they where ran like...

This past weekend i lost 5th gear in the tow rig. Its a 98 ram 2500 2wd with the NV4500 trans. Pulled the rear tail housing hoping the retaining nut was the problem (evidently that is an issue with this trans). That wasn't the problem, the main shaft gear had 3-4 teeth broken off and that has...

Dad got a new XP afew weeks ago and we just got around to doing a cage on it. His only request was he wanted it as low as we could get it and still have 4" of head room with a helmet on so this is pretty much what we came up with.

Posting these up for lay. Any questions message him or call him at 205-388-9730. Two are TN cut and two are Aetna cut to the chords. On a set of 8x6.5 15" ORC 32 bolt beadlocks. Rings are dented and have rock rash. $1500.

Sold

Sold

Most of you guys that know me and wontwork know we have always been in to the mud racing scene. There was a pretty good turn out at the last race and I figured I would share some of the videos. The day started with me and dad both driving Maytag and ended up with us having to race one another...

I'm needing a 2.0 14" fox air shock. Let me know if you have anything.