• Help Support Hardline Crawlers :

Search results for query: *

  • Users: fl-krawler
  • Content: Threads
  • Order by date
  1. F

    Portals N ****

    I haven't had my own personal buggy in close to 11 years now. Every time I start a new ride for myself, I end up acquiring new parts that will not work with what I was currently building, or I end up having a customer come by with cash in hand for my partially completed project (everything is...
  2. F

    Sold/Expired (2) 10" 3rd members

    I have two 3.812 bearing strange ultra cases w/ load bolts for sale. One is assembled with 35 spline pinion 10" 5.43 gears that have been micro polished, 40 spline spool and a 1350 yoke. Unit is brand new and never used for anything other than mockup on a buggy. Other 3rd is NIB as well, and I...
  3. F

    Sold/Expired 2 seat chassis

    2 seat chassis. Main structure is 1.75x .120 wall DOM. Interior tubes are either .05 or .065 wall depending on their location and job. Chassis is 52.5" wide, 141" long and 56" tall (belly is 8" deep). My LSA/6l80/hero 3sp fit with no issues so just about any drivetrain can work. Will accommodate...
  4. F

    Sold/Expired please delete

    gone
  5. F

    Sold/Expired Mastercraft seats

    I am selling (2) mastercraft pro 4 seats, and (1) 40" wide bench. Seats are brand new and never used other than mockup in my buggy. Due to tight clearances around my transfer case I've decided to switch to Kirkeys. $1100 firm for the trio. Seats are located in Zephyhills Fl and I will ship on...
  6. F

    Sold/Expired Jeep chassis (Sold)

    Jeep chassis for sale. Setup for rockwells, LT1, 4l60e,D300. Frame, cage, fuel cell,tub, hood, and grille for $1500 (has a Fla title) (needs a good sandblasting and paint) Lt1 w/ wiring harness/ecm (runs but knocks) $500 (buy with the chassis and the full exhaust will be thrown into the deal)...
  7. F

    Sold/Expired 14- 20 michelin xml tires (sold)

    Set of (4) Michelin 14.00 x 20 tires (49" tall) Located in Zephyrhills Fl 33541. 80% tread, no dry rot. $800 no trades
  8. F

    Boat props

    Took the ole' lady out on our boat this weekend for V-day. While cruising across Tampa Bay we apparently got far enough out of the shipping channel to hit shallow water in which the prop caught something and broke a section off one of the blades about 1" wide, the length of the prop blade. How...
  9. F

    Time to start a new chassis

    Finally got a little time to start a build thread for my new buggy build, since I sold the last one before it was finished. The only parts being carried over from the old build are the 47" LTB's and the wheels they are mounted on. I have bounced back and forth on what axles I plan to run quite a...
  10. F

    Sold/Expired 2011 F350 dually (***SOLD****)

    Selling my 2011 F-350 crew cab long bed. 6.7L/auto with manual shift t-case and manual locking hubs. The truck is an optioned out XLT with pwr windows, door locks, keyless entry, steering wheel controls, adjustable pedals, and LCD dash display. Cloth seats Truck has 41k miles on it. Included is...
  11. F

    Anybody near Chattanooga?

    Anybody near Chattanooga that can store a Superduty, small 6 x12 trailer and a polaris rzr till this weekend. I have a friend that went to the Fattshack ride up there this weekend and now he is broke down in chattanooga. I'll be making a run up there this weekend to get it, but we are looking...
  12. F

    Sold/Expired Stak 3 speed monster box ***Sold***

    Thinking of selling my monster box and going with a 205. I have 23,27, and 32 spline input yokes that will go with the t-case. I have had the case for 5 years, but it has never been put to use, only used for mock-up.It is a drivers drop, has 1:1, 3.05:1 and 5.44:1 ratio's, and 1350 yokes. Case...
  13. F

    Sold/Expired sold

    4 seater chassis. 52.5" wide Comes with full exhaust (flowmaster mufflers) custom headers, and engine/trans mounts for a GEN III/IV GM drivetrain. It is set up to use a narrowed TJ hood/grill, BTF fusion cowl, profender air bumps and 36" wide currie antirock swaybars (all NOT included with the...
  14. F

    Sold/Expired Various TJ build parts

    I've made the choice to finish building my buggy project, so some of the jeep build parts have to go. (2) jeep TJ frames. One is bone stock, all original with all the factory mounts, except for the engine mounts. The other has had all the bracketry removed (coil buckets, engine mounts and susp...
  15. F

    Pile-o-parts help

    Do you ever get to a point where you are sitting on a pile of parts, and/or a few partially completed rigs and you can't make up your mind what you want to do. I was building a 4 seat rockwelled buggy on 47's, until I decided I wanted to build something much lower to the ground on 14b/rockwell...
  16. F

    Sold/Expired 97 jeep TJ

    I have decided to sell my TJ in order to fund the purchase of parts needed to finish my new buggy build. Originally this jeep belonged to one of my customers, but through a trade I ended up with it this past spring. Below is a link to the original build of the jeep before I acquired it. Jeeps...
  17. F

    Sold/Expired 4 seat tube chassis

    I am selling my chassis after a friend who was going to buy it backed out. I am asking $3500 for the chassis. It is set up currently for GM GEN III/IV engines and a 700R4 transmission/stak (but any other case will fit b/c the stak is huge). I am also willing to sell it complete, or with various...
  18. F

    Sold/Expired 14bolt parts

    I just acquired a 14bolt axle that I will be using to build a steering axle out of. It is missing the passenger side wheel hub and axle shaft, but I will be selling the drivers side wheel hub, axle shaft (short side) and both rear spindles. Parts are located in Zephyrhills, Fl, and I will ship...
  19. F

    Superduty inner C vs. Rockwell inner

    Ok, so I sold the buggy I was building about a month ago. I kept the axles, planning to use them for a new chassis build that I am starting. I've decided To go lighter, and drop some additional ride height. To do this I was going to run a Ford Superduty front HP60, stuffed with a Currie 35...
  20. F

    Sold/Expired Chevy D44 front, D60 rear

    Putting this feeler b/c I may be building a set of custom MOG-9 axles instead of using these on my TJ. Front axle: Full width Chevy D44. 8 lug, flat top knuckles with hi-steer and tie rod . I have a lock right locker for this axle that is not installed. 4.10 gears Rear axle: Full width D60...

Latest posts

Top