Has about everything on it that you can get, that is aftermarket. Wanting to trade for an off-road rig on tons or willing to sell for a good offer. ($18.5?)
List of parts:
2020 Stage 3 RZR Turbo S.
Full digital controller with 3 tunes, all on 93 octane.
All sandcraft driveline (Rev. 2 HD driveshaft, carrier bearing, front and rear motor mounts)
L&W radius rods
ORB +2 forward high clearance a arms
ORB trailing arms
Keller balljoints
Rhino 2.0 axles on all 4 corners
Shock Therapy springs
Front limit straps
Billet rear knuckles
New HD Polaris Bearings (w/3 spares)
Mud Buster extended fender flares
HSP heated seats
Hunter 3 point harness
NRP full shifter
AA lock and load stage 3 kit (turbo piping, charge piping stage 1, stage 3 tune, AA exhaust with quiet plug, high load helix in clutch with all the springs and magnets for clutch arms)
1 3/4 .120 wall DOM custom cage with front and rear bumpers tied in to frame
Aluminum roof
Full length HD 1/2" thick skid plates
Dual battery kit (New batteries)
Warn 4500# winch with interior switch and remote cord.
Alba beadlocks on 4 corners
35" toyo Utv tires (5)
1 non matching beadlock with new spare
Custom aluminum/metal doors
PRP carry bags on doors
Bluetooth Sound bar with mounted interior switches
Trail Radio w/ antenna
Baja designs yellow pod lights
White Light bar up top
Chase light on the back
Under hood electrical block
54/26/26 gear reduction with Sandcraft transmission bearings, seals, and HD retaining clip (installed less than 20 hrs)
Mounted fire extinguisher
Tool box mount
Comes with Ice chest and mount.
Adjustable drivers seat.
I am 6'1" and have plenty of head room.
Extra/spare driveline and suspension parts.
2 Bearing changing tools (1 for press, 1 by hand)
Bearing grease adapter tool
Clean Texas title in my name.
List of parts:
2020 Stage 3 RZR Turbo S.
Full digital controller with 3 tunes, all on 93 octane.
All sandcraft driveline (Rev. 2 HD driveshaft, carrier bearing, front and rear motor mounts)
L&W radius rods
ORB +2 forward high clearance a arms
ORB trailing arms
Keller balljoints
Rhino 2.0 axles on all 4 corners
Shock Therapy springs
Front limit straps
Billet rear knuckles
New HD Polaris Bearings (w/3 spares)
Mud Buster extended fender flares
HSP heated seats
Hunter 3 point harness
NRP full shifter
AA lock and load stage 3 kit (turbo piping, charge piping stage 1, stage 3 tune, AA exhaust with quiet plug, high load helix in clutch with all the springs and magnets for clutch arms)
1 3/4 .120 wall DOM custom cage with front and rear bumpers tied in to frame
Aluminum roof
Full length HD 1/2" thick skid plates
Dual battery kit (New batteries)
Warn 4500# winch with interior switch and remote cord.
Alba beadlocks on 4 corners
35" toyo Utv tires (5)
1 non matching beadlock with new spare
Custom aluminum/metal doors
PRP carry bags on doors
Bluetooth Sound bar with mounted interior switches
Trail Radio w/ antenna
Baja designs yellow pod lights
White Light bar up top
Chase light on the back
Under hood electrical block
54/26/26 gear reduction with Sandcraft transmission bearings, seals, and HD retaining clip (installed less than 20 hrs)
Mounted fire extinguisher
Tool box mount
Comes with Ice chest and mount.
Adjustable drivers seat.
I am 6'1" and have plenty of head room.
Extra/spare driveline and suspension parts.
2 Bearing changing tools (1 for press, 1 by hand)
Bearing grease adapter tool
Clean Texas title in my name.
Attachments
Last edited:
