7 72dozer` Guest Nov 30, 2011 #1 My dad just bought a jeep and its twin sticked and for some reason the front pops out when gong down a hill Any ideas
My dad just bought a jeep and its twin sticked and for some reason the front pops out when gong down a hill Any ideas
IRONHIDE Well-Known Member Joined Jul 22, 2011 Messages 88 Location hickman co. tn Dec 1, 2011 #2 Check the spring under the rubber stopper on top of the case. Sometimes those springs wear out and let the little ball in there not stay in the notch on the shift rail.
Check the spring under the rubber stopper on top of the case. Sometimes those springs wear out and let the little ball in there not stay in the notch on the shift rail.
COLT I'm on a boat. Joined Jun 15, 2010 Messages 932 Location Pensacola Fl Dec 1, 2011 #3 Check to make sure the floor board is not touching the shifter at all...
viseashane1 Well-Known Member Joined Jun 7, 2010 Messages 517 Location milton fl. Dec 1, 2011 #4 store bought kit or did they grind shift rail may not have grounded shift wright
7 72dozer` Guest Dec 1, 2011 #5 they machined the rail but he is a machineist by trade so i think its done right and the spring ill have to check that
they machined the rail but he is a machineist by trade so i think its done right and the spring ill have to check that