Buggy Brakes?

[skipnrocks]

I have a dual mc large bore brake mc and was wondering if it was actually going to work in the buggy. CNC told me it would but I am not sure. I have a small 4 seater buggy on tons with 42s?

I will be driving on the street also..

 

[wizzo]

what size bore mc and what calipers on the axles?

 

[skipnrocks]

not a 100 percent on the bore. this is the unit http://cncbrakes.com/dcbpa.asp?grp=dcbpa&subgrp=sm&series=214&subseries=ST with i think the 15in pedal, with one ton callipers front and rear? not really sure what specs to provide that would be helpful. Callipers are 1 ton from 79 chevy.

 

[skipnrocks]

OK so the mc is a 3/4 bore

 

[hinton]

i have about the same pedal and calipers i started with a 7/8 front and 3/4 rear master cylinder size and it did not work for me, i now have 1" bore master cylinders on both front and rear stops alot better

 

[wizzo]

3/4 seems small. i've got stock 1 ton cailipers on my 60 with 1" bore ww mc and 3/4 ton calipers on the 14bolt with 7/8" bore ww mc.

 

[skipnrocks]

I was afraid of that, im just going to sell this setup and get a hydroboost setup, I called pick and pull and they said 40 bucks if I pull it..