Menu
Forums
New posts
Search forums
Calendar
Monthly
Weekly
Agenda
Archive
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Help Support Hardline Crawlers :
Forums
Rock Crawling Forums
General Discussion
Buyer Beware of High Angle Driveline
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="badreligion_13" data-source="post: 139914" data-attributes="member: 437"><p>The pictures below will serve to speak for themselves. Never the less , anyone considering ever purchasing anything from Jesse Haynes at High Angle Driveline should see these pictures and hear my experience. I called Jesse to inquire about his " midship spline" he sells for two piece driveshafts for a pillow block bearing to ride on and be held in place with a removable yoke. I wanted to machine my own shaft for this purpose by using a dana 60 pinion. At the time I was running out of time and could not find one. So I spoke with Jesse about what he sold. At first I was rather happy to find he sold a mid ship spline that was in stock and was 29 spline. I immediately told him that was great as I had a 1410 dana 60 pinion yoke and that would work great with it since it is 29 spline. Mr.. Haynes then proceeded to tell me I could not use the D60 pinion yoke with it and I had to use one of his "special" yokes. When I inquired "why" his response was, " The midship spline has a funky 29 spline and the dana 60 pinion spline is different." So I then say Ok and agree to purchase a "used " special yoke. </p><p> One week later my package arrived. Immediately, there were red flags. First, the so-called "special yoke" was actually a DANA 60/70 PINION YOKE unlike what Jesse had to say on the phone. So I called him and confronted him on this. He proceeded to say "Well if you don't like it send it back and I will credit it you for it." I replied "OK" will do and hung up. I then looked at the midship spline and the yoke and realized there was no way the two would ever fit. I tried to put the yoke , the high angle yoke, on the mid ship spline from high angle and there was obviously no way in hell these two items were going together. Once again I call Jesse back. Once again in true arrogant fashion Jesse had the audacity to tell me that I was wrong in that the splines of the mid ship spline were the SAME as the splines on the spicer yoke that he sent me ( referring to the internal splines of the dana 60 yoke he SENT me and the splines on the midship). I said, " Uh, are you serious? Those splines on the midship have a different pitch than the spicer yoke not mention the splines are at least two to three times wider than splines in the spicer D 60/70 yoke YOU sent ME." Jesse's response " Well, if you want to say there different fine. I am npot going to argue with you because I know they are the same. Further, to get them to fit YOU need to get a 20 TON PRESS TO PUT THAT YOKE ON THAT SPLINE!!!!!!" Once again, " I said are you serious, that I need a 20 ton press to put that yoke you sent to me on that spline?" Jessee's response " YES." At this point I was done with this and said you need to refund my money and send a call tag as this is not acceptable. Yea I know why you need a 20 ton press, beause the splines are frigging different! </p><p>Well,30 days later no refund although VISA has addressed that problem. Let these pictures serve to anyone as a reference of what you might get or at least what to expect from High ANgle. Picture below has the midship spline on the Left from high ANgle next to a dana 60 pinion.You decide if a yoke designed to fit that pinion shaft, dana 60, is ever going to fit the splines of that mid ship spline on the left..</p><p></p><p>[attachment deleted by admin]</p></blockquote><p></p>
[QUOTE="badreligion_13, post: 139914, member: 437"] The pictures below will serve to speak for themselves. Never the less , anyone considering ever purchasing anything from Jesse Haynes at High Angle Driveline should see these pictures and hear my experience. I called Jesse to inquire about his " midship spline" he sells for two piece driveshafts for a pillow block bearing to ride on and be held in place with a removable yoke. I wanted to machine my own shaft for this purpose by using a dana 60 pinion. At the time I was running out of time and could not find one. So I spoke with Jesse about what he sold. At first I was rather happy to find he sold a mid ship spline that was in stock and was 29 spline. I immediately told him that was great as I had a 1410 dana 60 pinion yoke and that would work great with it since it is 29 spline. Mr.. Haynes then proceeded to tell me I could not use the D60 pinion yoke with it and I had to use one of his "special" yokes. When I inquired "why" his response was, " The midship spline has a funky 29 spline and the dana 60 pinion spline is different." So I then say Ok and agree to purchase a "used " special yoke. One week later my package arrived. Immediately, there were red flags. First, the so-called "special yoke" was actually a DANA 60/70 PINION YOKE unlike what Jesse had to say on the phone. So I called him and confronted him on this. He proceeded to say "Well if you don't like it send it back and I will credit it you for it." I replied "OK" will do and hung up. I then looked at the midship spline and the yoke and realized there was no way the two would ever fit. I tried to put the yoke , the high angle yoke, on the mid ship spline from high angle and there was obviously no way in hell these two items were going together. Once again I call Jesse back. Once again in true arrogant fashion Jesse had the audacity to tell me that I was wrong in that the splines of the mid ship spline were the SAME as the splines on the spicer yoke that he sent me ( referring to the internal splines of the dana 60 yoke he SENT me and the splines on the midship). I said, " Uh, are you serious? Those splines on the midship have a different pitch than the spicer yoke not mention the splines are at least two to three times wider than splines in the spicer D 60/70 yoke YOU sent ME." Jesse's response " Well, if you want to say there different fine. I am npot going to argue with you because I know they are the same. Further, to get them to fit YOU need to get a 20 TON PRESS TO PUT THAT YOKE ON THAT SPLINE!!!!!!" Once again, " I said are you serious, that I need a 20 ton press to put that yoke you sent to me on that spline?" Jessee's response " YES." At this point I was done with this and said you need to refund my money and send a call tag as this is not acceptable. Yea I know why you need a 20 ton press, beause the splines are frigging different! Well,30 days later no refund although VISA has addressed that problem. Let these pictures serve to anyone as a reference of what you might get or at least what to expect from High ANgle. Picture below has the midship spline on the Left from high ANgle next to a dana 60 pinion.You decide if a yoke designed to fit that pinion shaft, dana 60, is ever going to fit the splines of that mid ship spline on the left.. [attachment deleted by admin] [/QUOTE]
Insert quotes…
Verification
Post reply
Latest posts
For Sale
38" MTR's on 17's
Latest: xjcrawler
Yesterday at 2:35 PM
Off Road 4x4 Parts For Sale
Daves Offroad Supply
Latest: Daves Offroad Supply
Yesterday at 10:11 AM
Vendors
T
For Sale
85-91 Ford Kingpin Dana 60
Latest: truck-oholic
Tuesday at 5:29 PM
Off Road 4x4 Parts For Sale
Salvage 10
Latest: ridered3
Monday at 7:09 PM
Tech & Fab
B
For Sale
Artec Back-bone truss for 14 bolt
Latest: Bebop
Monday at 10:41 AM
Off Road 4x4 Parts For Sale
Forums
Rock Crawling Forums
General Discussion
Buyer Beware of High Angle Driveline
Top