nvrenuf
Well-Known Member
High Ange Driveline 42° CV and the matching 32 spline flange (no hardware), $250 + shipping (probably 22~23 lbs)
This is from the rear driveshaft in my Blazer but it would also be perfect for a front driveshaft in a tall truck. I originally purchased the driveshaft used but, per Jess at HAD, the 42° version is identifiable by the 2 rings cast in to the center body of the CV. This thing is big (see paint can for scale) and ran smooth, the downside is it's not a sealed unit so it needs to be greased frequently.
It is used so if you have any questions about it, please ask.
The tubing pilot is 2.75" in diameter.
The flange is 32 spline (I had it on a np205).
This is from the rear driveshaft in my Blazer but it would also be perfect for a front driveshaft in a tall truck. I originally purchased the driveshaft used but, per Jess at HAD, the 42° version is identifiable by the 2 rings cast in to the center body of the CV. This thing is big (see paint can for scale) and ran smooth, the downside is it's not a sealed unit so it needs to be greased frequently.
It is used so if you have any questions about it, please ask.
The tubing pilot is 2.75" in diameter.
The flange is 32 spline (I had it on a np205).
