• Help Support Hardline Crawlers :

HP Tuners Help

zayne2427

There's only one way to find out
Joined
Nov 20, 2009
Messages
2,432
Location
Cullman, Al
Anybody around Cullman Al familiar with HP Tuners that can show me the basic. Trying to get a base tune on my brothers new LS swap in his buggy( Cam, Springs, Injectors Pretty much exact same engine as Pholmann). Got a few other LS swaps going on in hot rods so i figured i would go ahead and buy the HP tuner setup. Will be delivered today but haven't ever messed with one. Its going to be nice once i figure it out but the only knowledge with the unit so far is what i have watched on youtube or read on google. I know there is going to be a large learning curve.
Any tips or advice in the right direction would be awesome
 
I also have HP tuners. I opted for the pro version to be able to datalog the buggy without a laptop in it. I was hoping for more responses on this thread. I used LS swap pages for thinning down the harness and HP tuners to delete codes that were not needed and VATS. Engine runs properly but it is a stock engine and tune for the most part.
I purchased a wideband to use as well and I am at the point of needing to log and adjust the VE,spark tables.
I would love to meet and be educated by someone who truly understands the tuning process. I'm not looking to get into tuning engines for profit. I would like to be able to do it myself for convenience and saving $.
 
@zayne, if you're at RBD, bring your laptop with HP Tuners, we can pull the tune out of Lori's buggy. It'll give you a starting point. I can go over some HP Tuners basics with you too.
 

Latest posts

Top