Ls oil pans

scubajeeper · May 4, 2014

I know this has probably been beat to death but what are y'all running to keep your ls's alive? Has anyone tried the Holley pan? I've searched around and was just wondering if maybe there was something new out there.

hokie_yj · May 4, 2014

I just ordered the pan that Pacific Fabrication sells, it should be here next week. I've read a lot of good reviews about it. I also plan to run a 3 Qt. accumulator.

http://pacificfabrication.com/lsx-sheetmetal-oil-pans.html

I was planning to run a GTO pan with an Improved racing baffle, but it wouldn't work with the way my drivetrain is set in my chassis.

crawlin85cj · May 4, 2014

I know people have complained about Kevko but I've been running them for 3 years without a single issue. I've had them on 5 rigs and have been completely happy.

2010 Jim' Garage U4 car
2013 Wide Open Design WFO

Looking for a JK!!!!

1tonyj · May 4, 2014

Looked a lot of different pans to replace the big 5.3 truck pan. Decided on the Mast Motorsports pan......just ordered it so we will see how I like it...but it seemed to have good reviews.

scubajeeper · May 4, 2014

This one looks identical to the PAC fab

And it's 399 instead of 465

1TONTJ · May 4, 2014

scubajeeper said:
Has anyone tried the Holley pan?

Improved Racing developed a pretty sweet baffle that fits inside the Holley LS pan. http://www.improvedracing.com/baffled-pans/holley-ls-retro-fit-oil-pan-p-442.html

Holley offers the same baffle under their own part #. http://www.holley.com/302-10.asp

race_jeep · May 4, 2014

I ran the kevko with no problems, I'd run it again :driving:

plumberdude · May 4, 2014

Me and a buddy running Kevco with big cams on rockwells..We do Clayton,Hot springs and Moab no problems, when others are loosing pressure.

cjunknxs · May 4, 2014

Kevco for me as well, they custom made mine to hold 8 quarts, always have good pressure.

InDaShop · May 5, 2014

I've ran a Kevco, but the quality was shitty at best. Maybe they've gotten better. I know Mast makes a good one, I know PSC steering makes a good baffle for a stock pan.
I currently run a Canton, I'd compare it to similar style as the kevco but a much much higher shelf finish on it.