• Help Support Hardline Crawlers :

Parting out LS Toyota project

blackrunner93

Well-Known Member
Joined
Jan 10, 2009
Messages
105
I'm parting out my brother's LS Toyota project. We both decided that we just don't have the spare time to dedicate to it. All parts are located in Killen, AL.

-1985 Toyota extended cab pickup. I have the cab, bed, fenders, doors, grille, lights, and frame with clean title. The front inner fenders and core support have been removed at the firewall. The body is typical condition for an 85 pickup and the frame is slightly bent in the front passenger quarter. It could be straightened pretty easily. $800

-02 6.0 LQ4 with accessories, harness, and computer. Mileage unknown. It came out of an A/C service van. $1500

-Freshly built 4l60e with 0 miles on it. I had this trans built for this project by Billy Landers. It's suppose to hold up to the 6.0, one tons, and 43s. $1000

-Dana 300 with 4.1 terra low kit. Upgraded 32 spline input and output shafts. 1350 yokes, twin sticks, custom Case wrapped with 1/4 inch plate. Passenger drop. 27 spline transmission shaft. $1400

-Late model, finned 14 bolt rear with thick center and tube, factory disc brakes. $450

-43" TSL sx tires suppose to only have 2 rides on them and in good condition. Non-stickies. No wheels. $2000
 

Attachments

  • 20201002_115400.jpg
    20201002_115400.jpg
    3.4 MB · Views: 392
  • 20201002_115422.jpg
    20201002_115422.jpg
    3.4 MB · Views: 377
  • 20201002_115513.jpg
    20201002_115513.jpg
    1.7 MB · Views: 351
  • 20201002_115627.jpg
    20201002_115627.jpg
    2 MB · Views: 372
  • 20201002_115721.jpg
    20201002_115721.jpg
    1.9 MB · Views: 385
  • 20201002_120114.jpg
    20201002_120114.jpg
    2.1 MB · Views: 450
Top