• Help Support Hardline Crawlers :

pretty woman 4 seater

bigbchevy

Well-Known Member
Joined
Aug 6, 2013
Messages
373
ok so I will start with this I picked up a chassis from the other side of the state (Michigan) it was built a few years ago as a 2 seater and had been passed around like a whore with everyone changing a little bit about it but it never got finished.
well I picked it up for really cheap and wanted to make it my own so I cut it all apart to make it a four seater.
 

Attachments

  • build1.JPG
    build1.JPG
    74.2 KB · Views: 205
  • build5.JPG
    build5.JPG
    91 KB · Views: 1,969
  • build2.JPG
    build2.JPG
    69.9 KB · Views: 171
I have a 92 mustang motor that I picked up from a friend he had over $9000 in to it and I picked it up for $1000 and a running stock motor. so I went and got the 347 stroker kit for it and will be having that built by one of my good friends in the next few week. behind the 347 will be a built c-6 with a behemoth drive line doubler and a twin sticked 205 . all will shift by billet aluminum cable shifters. should have a 5.7-1 low low range :driving:
 

Attachments

  • motor1.JPG
    motor1.JPG
    39.9 KB · Views: 1,945
  • motor2.JPG
    motor2.JPG
    33.3 KB · Views: 1,936
  • motor3.JPG
    motor3.JPG
    33.7 KB · Views: 1,907
I will be running a built ford 60 front with 5.13 gears chromolly shafts and full hydro with a shaved 14bolt rear . both will have artec trusses and four linked.
im running 16 ori sruts in the front and 18s in the rear with all my links being 7075 aluminum 2.5 inch. it will have 1.25 hiems and a belly pan made of 1/4 inch aluminum and cutting board material
 
ok so one of the first things I did was cut all the tube of the rear of the chassis .
 

Attachments

  • chassis25.JPG
    chassis25.JPG
    75.3 KB · Views: 149
  • chassis23.JPG
    chassis23.JPG
    83.5 KB · Views: 144
  • chassis22.JPG
    chassis22.JPG
    83.1 KB · Views: 150
  • chassis21.JPG
    chassis21.JPG
    80 KB · Views: 152
the best part of the whole deal is my 3 year old son loves the thing and wants to help me every step of the way!
 

Attachments

  • evan3.JPG
    evan3.JPG
    65.1 KB · Views: 152
  • chassis26.JPG
    chassis26.JPG
    73.1 KB · Views: 141
  • evanwelding.JPG
    evanwelding.JPG
    76.5 KB · Views: 143
  • evan1.JPG
    evan1.JPG
    53.6 KB · Views: 148
on with the progress picks!
 

Attachments

  • buggy6.JPG
    buggy6.JPG
    75.4 KB · Views: 1,747
  • buggy7.JPG
    buggy7.JPG
    72.4 KB · Views: 1,765
  • buggy8.JPG
    buggy8.JPG
    74 KB · Views: 1,772
  • buggy9.JPG
    buggy9.JPG
    82.5 KB · Views: 1,769
and more
 

Attachments

  • buggy4.JPG
    buggy4.JPG
    76.6 KB · Views: 1,745
  • buggy3.JPG
    buggy3.JPG
    79.7 KB · Views: 1,752
  • buggy2.JPG
    buggy2.JPG
    77.1 KB · Views: 1,753
  • buggy1.JPG
    buggy1.JPG
    66.6 KB · Views: 1,744
ok im trying to get up to dat then ill post as things get done but here are some from last weekend. keep in mind this is my first time trying to build a true buggy lol
 

Attachments

  • buggy 4154.JPG
    buggy 4154.JPG
    275.6 KB · Views: 141
  • buggy 4153.JPG
    buggy 4153.JPG
    75.8 KB · Views: 143
  • buggy 4152.JPG
    buggy 4152.JPG
    59.8 KB · Views: 137
  • buggy 4151.PNG
    buggy 4151.PNG
    503.1 KB · Views: 1,745
igot some more cool stuff!
 

Attachments

  • fittings.JPG
    fittings.JPG
    15.9 KB · Views: 1,533
  • fuel pump.JPG
    fuel pump.JPG
    13.3 KB · Views: 1,525
  • fuel rail.JPG
    fuel rail.JPG
    17.5 KB · Views: 1,521
im in the middle of rebuilding my 205 and twin sticking it now and my double should be here by the weekend :****:
 
Re:

Attention whore! ;-) keep it up Scott. Text me if Jason dropped off those parts for me!

Sent from my SGH-M919 using Tapatalk
 
Ted Nugent called again.said he wants his bronco back... :****:
Looking good Scott. Keep at it.
 

Latest posts

Top