Mizbehaved
Active Member
Hey guys! I have started sand, an media blasting for myself an thought I might as well do it after hours. I can do anything thats 40Lx30xTx20D. I also do anything else too that is larger, however that's one of my cabinets sizes, and I have a new box almost done that's 40Lx40Tx20D. I can do wheels, motor parts, A-arms, frames, an much more. I use Black beauty, Sand, Glass Bead, Walnut, an various types of aluminum. I can leave the items bare metal, or I can spray them. I use enamel tractor paint on anything that's outside, and will be exposed. Motor parts, I will use actual engine paint. Turn around time is based on project's, however typical turn around times shouldn't be no longer then a afternoon, frames will be done on weekend's. I'll list below some information.
Location: Columbia, KY
Contact Information: Josh, (256) 743-0821
Here is one of my box's I use.
Some things I have done to show as examples.
These two are just picture's of how it clean's. I might have screwed up some things on these, however they was junk to start with.
Location: Columbia, KY
Contact Information: Josh, (256) 743-0821
Here is one of my box's I use.
Some things I have done to show as examples.
These two are just picture's of how it clean's. I might have screwed up some things on these, however they was junk to start with.