I will be running a sway bar (likely going with a TK1) on the Jeep. Specs are -95 YJ with 14"coilovers, 3 link front,4 link rear, 38 SX , custom Toyota axles and a 2.5L / Auto. Front coilovers are 80/175 and the rears are 80/85. Rig should weigh in around 2900 - 3100. Coilover springs are what Ryan@Accutune suggested based on the valving he did on my coilovers. Wheel base is 103" and the width from outside tire to outside tire is 81". In the rear I have way more room which gives me some flexibility in regards to where I put the sway bar. In the front I am limited. My last rig I ran one in the front only but it did not see any street time but this one will. Who here is only running one sway bar and is it in the front or rear and how has it performed ?