• Help Support Hardline Crawlers :

xp41000 Radius Rod Joints

BigCountry

Well-Known Member
Joined
Oct 10, 2010
Messages
363
Location
Harriman, TN
Want to build a beefier set of radius rods and was wondering if anyone knew of a heim joint/spacer kit... I know most use regular 5/8" joints but the metric spacer issue has me wondering what folks are doing??
 
Re:

I just bought these since i needed heims also. They came with spacers but i had to add a little on chassis side. They where too thin to work with my bumper.

http://www.amazon.com/gp/aw/d/B00LMUX5PY/ref=mp_s_a_1_4?qid=1421545701&sr=8-4&pi=AC_SX110_SY165_QL70&dpPl=1&dpID=41lpzkfy77L&ref=plSrch

Drew Pate
Cordova Al
 
blacksheep10 said:
I had my own made. Buddy is a machinist. I have him make like 50 at a time. Outers are a couple thou under 1" out to out (.124 lip on it) and inners are like 1.375 out to out.

Wanna sell some? Need enought to do lowers and uppers on 2 machines...
 
I make my own as well. The way i designed mine, they take the slop out of arched lowers so they dont flop back and forth and hit the frame
 

Latest posts

Top