betteroffsingle
Well-Known Member
- Joined
- Jun 26, 2012
- Messages
- 136
SOLD
2500.00
As far as trades go, need stuff for a '98 XJ I'm getting that is currently 2.5/AX-5
Good running 4.0 and AX-15 and NP231, prefer an SYE, might settle for AW4
Decently built HP D30 or 44 and 44 rear
Yamaha XS650 bobber project, parts as follows
Custom built frame from Cycle One Mfg in OK. Built to accept a 200mm rear tire. 4" stretch, dropped seat pocket, 30* rake. Manufacturer's Certificate of Origin in hand of course.
Springer front end from Dragon Soul Customs in the UK. This a serious piece of craftsmanship, not some DNA garbage. Bearings, cups and seals included.
Motor is from a running/riding '81 that I bought strictly for the motor for this project (sold the rolling chassis) it is on a TC Bros engine stand.
Hydraulic clutch conversion kit with new controls (to fit 7/8" handlebars) from XS650 shop.de in Germany.
18 x 5.5 Harley style rear wheel with new Dunlop Elite 3 200mm tire
21" front rim with matching new Dunlop Elite 3 90/90/21
New rear brake caliper and rotor
Mr Lucky's 34 tooth rear sprocket
New front rotor (no caliper)
Harley Style forward controls with kickstand that mounts to left side. Frame bosses included already cut to match the angle of the frame, will need to cut to length to suit you. Plates for mounting the forwards to the frame bosses also included.
TC Bros air ride seat mount
Motogadget M-unit blue with all new wiring kit and proper crimping tool. Purchased from Revival Cycles. Hands down the best way to wire the bike properly.
Motogadget M button for running wiring inside the handlebars to keep things clean and uncluttered. Also from Revival.
Spark plug wire kit from Revival with appropriate crimping tool.
All new hardware/fasteners for the motor plus new o-rings for the covers.
License plate mount with bolts that double as tag lights.
Both the platform jack and the small jack go with this.
This is 4000.00 worth of parts. You could barely buy the frame and springer front for my selling price. This is a damn fine start for someone to wrap up and have a quality ride.
Located in Bartlett (Memphis)
Nine 0 won 2 ate 7 9 ate won 4 if you prefer. Just include you are a hardliner in your text.
Sent from my SM-G950U using Tapatalk
2500.00
As far as trades go, need stuff for a '98 XJ I'm getting that is currently 2.5/AX-5
Good running 4.0 and AX-15 and NP231, prefer an SYE, might settle for AW4
Decently built HP D30 or 44 and 44 rear
Yamaha XS650 bobber project, parts as follows
Custom built frame from Cycle One Mfg in OK. Built to accept a 200mm rear tire. 4" stretch, dropped seat pocket, 30* rake. Manufacturer's Certificate of Origin in hand of course.
Springer front end from Dragon Soul Customs in the UK. This a serious piece of craftsmanship, not some DNA garbage. Bearings, cups and seals included.
Motor is from a running/riding '81 that I bought strictly for the motor for this project (sold the rolling chassis) it is on a TC Bros engine stand.
Hydraulic clutch conversion kit with new controls (to fit 7/8" handlebars) from XS650 shop.de in Germany.
18 x 5.5 Harley style rear wheel with new Dunlop Elite 3 200mm tire
21" front rim with matching new Dunlop Elite 3 90/90/21
New rear brake caliper and rotor
Mr Lucky's 34 tooth rear sprocket
New front rotor (no caliper)
Harley Style forward controls with kickstand that mounts to left side. Frame bosses included already cut to match the angle of the frame, will need to cut to length to suit you. Plates for mounting the forwards to the frame bosses also included.
TC Bros air ride seat mount
Motogadget M-unit blue with all new wiring kit and proper crimping tool. Purchased from Revival Cycles. Hands down the best way to wire the bike properly.
Motogadget M button for running wiring inside the handlebars to keep things clean and uncluttered. Also from Revival.
Spark plug wire kit from Revival with appropriate crimping tool.
All new hardware/fasteners for the motor plus new o-rings for the covers.
License plate mount with bolts that double as tag lights.
Both the platform jack and the small jack go with this.
This is 4000.00 worth of parts. You could barely buy the frame and springer front for my selling price. This is a damn fine start for someone to wrap up and have a quality ride.
Located in Bartlett (Memphis)
Nine 0 won 2 ate 7 9 ate won 4 if you prefer. Just include you are a hardliner in your text.
Sent from my SM-G950U using Tapatalk