Holy fawkin pimp! Clarks da man!

CHOP SHOP · Dec 18, 2009

I had to get a bigger hat on the way home!:haha:

Damn!!! :bling:

CHOP SHOP · Dec 18, 2009

two mo.

And a big thanks to all who have helped be rebead tires over the years.:awesomework:

Never again!!:flipoff:

Boosted · Dec 18, 2009

Those are badass! Hmm, sure wish I could get custom rings for my TR's.

Fordzuki · Dec 18, 2009

Fawkin sweet.

zukkev · Dec 18, 2009

Damn dude, those do look Great!!!!

Clark · Dec 18, 2009

SWEET!! :smokey: Thanks for the pics.

Clark · Dec 18, 2009

Boosted said:
Those are badass! Hmm, sure wish I could get custom rings for my TR's.

I can make you some rings, but not in AL, only in steel.:beer:

CHOP SHOP · Dec 18, 2009

ClarkW said:
SWEET!! :smokey: Thanks for the pics.

tanks for the beadlocks! man! Look for em in the elbe woods!!

Brian H · Dec 18, 2009

I thought the plasma could cut aluminum..

Clark · Dec 18, 2009

It can, but the results will be far from what you see on AL beadlocks like TR, WE, Raceline, etc. The quality is not the same, i won't waste my time. The steel will come out nice though.

Brian H · Dec 18, 2009

ClarkW said:
It can, but the results will be far from what you see on AL beadlocks like TR, WE, Raceline, etc. The quality is not the same, i won't waste my time. The steel will come out nice though.

What about aluminum inners and steel outers?

runner over · Dec 18, 2009

those are sweet... except the chop shop part:fawkdancesmiley:

Clark · Dec 18, 2009

Brian H said:
What about aluminum inners and steel outers?

It'll work as long as they're not touching eachother. So will steel inners and AL outers.:awesomework:

Brian H · Dec 18, 2009

ClarkW said:
It'll work as long as they're not touching eachother. So will steel inners and AL outers.:awesomework:

What Im getting at is i need aluminum inners for my wheels......can you do it?

Boosted · Dec 18, 2009

Brian H said:
What about aluminum inners and steel outers?

I like that idea, something thin between the wheel and the steel outer. Could even get creative with the holes in the steel ring with the aluminum showing thru them.

Clark, now that you sparked my interest in this, we will definately have to finger this one out when Im at your shop.

Clark · Dec 18, 2009

Brian H said:
What Im getting at is i need aluminum inners for my wheels......can you do it?

It's possible, but i don't have the material, so however much a 4x4 sheet would be. Plus my cutting costs. Since you have to remove the tires anyways, you should get some steel wheels, weld them up, then swap tires.

Do you also have a TIG welder? And AL rod? Do you know anyone who can weld 200 or so inches of airtight AL TIG?

If you want AL inners, go to TR. If you want steel talk to me.:awesomework:

Clark · Dec 18, 2009

Boosted said:
I like that idea, something thin between the wheel and the steel outer. Could even get creative with the holes in the steel ring with the aluminum showing thru them.

Clark, now that you sparked my interest in this, we will definately have to finger this one out when Im at your shop.

Sounds goood!

Brian H · Dec 18, 2009

ClarkW said:
It's possible, but i don't have the material, so however much a 4x4 sheet would be. Plus my cutting costs. Since you have to remove the tires anyways, you should get some steel wheels, weld them up, then swap tires.

Do you also have a TIG welder? And AL rod? Do you know anyone who can weld 200 or so inches of airtight AL TIG?

If you want AL inners, go to TR. If you want steel talk to me.:awesomework:

I know who can weld it...... But nevermind Mr. Testy.

Clark · Dec 18, 2009

Brian H said:
I know who can weld it...... But nevermind Mr. Testy.

I'm just saying, it's more work for everyone, and i can't do as good a job as TR. If you insist, i can make you some, hell i have a tig you can use too.

Brian H · Dec 18, 2009

ClarkW said:
I'm just saying, it's more work for everyone, and i can't do as good a job as TR. If you insist, i can make you some, hell i have a tig you can use too.

Well i have the wheels and Dan can weld them up for me. Im kind thinking that the route i want to go. If you will do it ill go get the plate.:awesomework: