Search results for query: *

I had the currie 3" or 4" spring with a 1.25" body lift on 35" tires. I had the undercover fab skid plate and oil pan skid.

DF Fabrication in CA

This is the air filter I put in my mine: https://desertcraft-us.3dcartstores.com/RZR-XP1000XPTTurbo-S-Air-Filter_p_101.html I'm not a dealer for them.

I have his tune on an 18' xp1000 for two years or so. I looked at the codes on google and it looks like you could have a fuel pump issue. Back to Gilomen, I run his tune without an issue with a little added power and fans come on sooner. I don't think you can go wrong at all by doing it, even...

I don't see why not. My plug comes out just fine and a matter of fact, the front diff just came back from Sand Craft for a rebuild. Broke the plastic junk in their (xp 1000) and had them rebuild mine. Pissed because I got the electric line behind the rack and tore the line all up. Going to mend...

These are nice and I have one I plan on using. Need one outside of Black Friday, happy to help. MSR makes a nice led light up relay as well.

In car com's (aka: intercom system): - You can talk to everyone inside of the rig and it's isolated communication, meaning your not transmitting to another rig - Capable for 1,2, 3, or 4 people to listen to each other or talk to each other - Depending on the intercom system, music works by plug...

The group will not hear your conversation until you hit the push to talk (PTT) button, otherwise the conversation stays in the rig. The PTT button transmit to every one within range and on the same channel.

You can use the hand held with in car coms. In car coms allows you to talk to the passenger, listen to music, and talk to another rig with a radio plugged into it. All you would need to do is wear the head sets with the microphone.

Efficient use of space. I like it.

Replied sir Sent from my SM-N960U using Tapatalk

Re: Re: Atlas tcase?? I have a 6.0, 6l80e, 3.0 atlas, with 4.88 gears going into my tj. It will wheel some and see street time as well. Let me know if you need help with an atlas. Sent from my SM-N960U using Tapatalk

I am an Amsoil Dealer psc - has said swepco Howe - has told me GM steering fluid in the past.

Re: Re: ls motor on E85 I bought Aeroquip lines that are rated for e-85. Read the mustang guys had good luck with them on the svt forum. Need any aeroquip or areomotive stuff, let me know. Sent from my SM-G935V using Tapatalk

Re: Re: ls motor on E85 How much run time are you allowing before you change the filters? I have 10 micron areomotive filters as well. Sent from my SM-G935V using Tapatalk

Re: G8 pan is an 8qt rear sump pan. Improved racing has baffling that will bolt into it. Sent from my SM-G935V using Tapatalk

So I need to update this since it show up in the all build thread Sent from my SM-G935V using Tapatalk

Re: I had rcv cut my double spline stuff for a 9/10". Sent from my SM-G935V using Tapatalk

Re: Re: Re: Re: LS Accumulator Pretty much in a way kinda what I was saying and sucked at for trying to be quick. It should be closest to the pan. If you have an oil cooler I was advised to run it after the oil cooler if you are using one. Canton told me if you choose to run an electric...

Re: Re: LS Accumulator So it doesn't push too much through the cooler to hurt it. Sent from my SM-G935V using Tapatalk