14 bolt spool

[smurfy90]

I remember I've read somewhere that somebody made a 14 bolt spool that was 35 spline to be able to use my current Dana 60 shafts. Can anybody point me in a direction to find this? Thanks.

 

[hokie_yj]

I'm pretty sure that was posted by 40spline.com on here a few weeks ago.

 

[wizzo]

40 spline is looking into making one. they are not in the process of making any 35 spline at this time

 

[smurfy90]

Would It be a down grade to keep the the inner 60 shafts Instead of having 14 bolt shafts made?

 

[alli85]

14 Bolt Shafts are just little bigger in diameter than the 60 shafts that's pretty much the only difference.

 

[greenlion]

http://www.hardlinecrawlers.com/forums/index.php?topic=29974.0

 

[wizzo]

Would It be a down grade to keep the the inner 60 shafts Instead of having 14 bolt shafts made?

i think it really depends on the quality of the shafts you currently have and the quality of the shaft you would have made.

 

[smurfy90]

http://www.hardlinecrawlers.com/forums/index.php?topic=29974.0

Good job Adam! GEEEZZZZZZZZZZZ! $600 for a 35 spline spool. May stick with 30 spline shafts and spool from Hudlow. I now have Yukon chromos

 

[Rockwells607]

I think I've heard of people welding 35 spline side gears in a 14 bolt carrier to make their own

 

[BIG_BLAZER86]

My buddy welded Dana 60 spiders in his 14 bolt to make it a steerable axle( he already had 35 spline RCVs)

 

[rek]

I think I've heard of people welding 35 spline side gears in a 14 bolt carrier to make their own

You have to have the side gears machine down to fit in a 14 bolt carrier

 

[BIG_BLAZER86]

Yeah we did it with a metabo then welded it in there,its held up for 7 years so far