I've got a set of DIY beadlock 17" 8x6.5 wheels 39 bolt hole rings.
This pic is with the new steel rings.
Now....I have 3 sets of rings for these. 2 steel and one set aluminum.
I also have anti-coning rings as well.
Steel set - countersink bolt heads
Aluminum set - countersink bolt heads
NEW steel set you will need bolts like these.
I needed to have the aluminum rings shaved down a little and one ring was cut too much. The guy that shaved them down for me cut me out a whole new set of 1/4" steel rings and powder coated them a metallic silver. They are sharp!
These rings can't use the countersink bolts. Well they could you would just have to countersink the holes yourself. I've not gotten any new hardware to go along with the new steel rings.
The new rings have never been bolted to a rim or tire.
I bought them used but never used them. I found a set of racelines and these are sitting under my workbench.
I'll take $500 OBO
I can get you pics of everything if you like.