**Digger**
Well-Known Member
- Joined
- Jan 31, 2013
- Messages
- 49
I am posting up my 2001 Bullitt DHG for sale. Current mileage on the odo is 56,563.9. It has a built motor, Kenne Bell 2.2, built rear end, suspension, etc. The motor has about 8000 miles since new build, and runs great. Car made 575rwhp/507rwtq and is a blast to drive. Car tuned by Bob @ Kurgan Motorsports a well-known Mustang tuner. I am the third owner, and car was garaged its entire life. Car has been maintained very well, and is always kept clean. I have all receipts and paperwork on all parts since the car was brand new. Also have tons of the factory parts that were removed from the vehicle. All factory parts are included with sale if the buyer wants them.
Here are the specs:
Motor (all 8000+/- miles)
• Std Bore/stroke 03 Cobra Shortblock -- Refreshed by Walker Custom Engines
o ARP Head and rod studs
o Windage tray
o Clevite Bearings
o Total Seal rings
o Moroso 7qt oil pan
• MMR Stage 3 race ported heads w/comp valve springs, Ferrea Valves (oversized 2mm), Bronze valve guides
• Modular Powerhouse Kenne Bell cams
• Team breed aluminum valve covers
• MMR racing/street oil pump w/ cryo gearset
• Kenne Bell 2.2 Supercharger
• Oversized heat exchanger and reservoir
• 8-rib pulley setup
• New alternator, a/c compressor
• Battery relocation to trunk
• Moroso Aluminum radiator reservoir
Fuel System
• 03 Cobra tank and pumps
• Kenne bell boost-a-pump
• 60lb injectors
• Fuel cutoff switch
Suspension
• H&R Lowering springs
• Steeda upper and lower rear control arms
Wheels/Tires
• Front: 17x8 Factory Bullitt wheels w Nitto Envo tires (like new)
• Rear: 17x10.5 Bullitt wheels w Toyo Proxes TQ Drag Radials (4/32nds, half worn)
Exhaust
• Bassani stainless steel catback exhaust
• BBK Long tube headers
• BBK x pipe
Transmission/Clutch
• Stock Tremec TR-3650
• Custom clutch by Clutch Exchange Service, Powder springs
• Steeda Short shifter
• Ford Racing Aluminum driveshaft
• Driveshaft safety loop
Exterior
• Steeda 2in Cowl hood
• Mach 1 chin spoiler
• Stock otherwise
Interior
• Billet interior knob kit (window switches, ac knobs, radio knobs, e-brake handle)
• Auto dimming rearview mirror
• Autometer A piller pod -- Boost and fuel pressure gauges
• Stock otherwise
Rear end
• Moser 31 spline axles
• Eaton trac loc
• TA girdle
• 3.73 gears
I am sure I am forgetting some things, but the car is pretty complete.
Asking $15,000
Feel free to contact me @ 770-Five Hundred-8658 JB
I can only accept text during work hours!
I have tons more pictures, please just ask.
Here are the specs:
Motor (all 8000+/- miles)
• Std Bore/stroke 03 Cobra Shortblock -- Refreshed by Walker Custom Engines
o ARP Head and rod studs
o Windage tray
o Clevite Bearings
o Total Seal rings
o Moroso 7qt oil pan
• MMR Stage 3 race ported heads w/comp valve springs, Ferrea Valves (oversized 2mm), Bronze valve guides
• Modular Powerhouse Kenne Bell cams
• Team breed aluminum valve covers
• MMR racing/street oil pump w/ cryo gearset
• Kenne Bell 2.2 Supercharger
• Oversized heat exchanger and reservoir
• 8-rib pulley setup
• New alternator, a/c compressor
• Battery relocation to trunk
• Moroso Aluminum radiator reservoir
Fuel System
• 03 Cobra tank and pumps
• Kenne bell boost-a-pump
• 60lb injectors
• Fuel cutoff switch
Suspension
• H&R Lowering springs
• Steeda upper and lower rear control arms
Wheels/Tires
• Front: 17x8 Factory Bullitt wheels w Nitto Envo tires (like new)
• Rear: 17x10.5 Bullitt wheels w Toyo Proxes TQ Drag Radials (4/32nds, half worn)
Exhaust
• Bassani stainless steel catback exhaust
• BBK Long tube headers
• BBK x pipe
Transmission/Clutch
• Stock Tremec TR-3650
• Custom clutch by Clutch Exchange Service, Powder springs
• Steeda Short shifter
• Ford Racing Aluminum driveshaft
• Driveshaft safety loop
Exterior
• Steeda 2in Cowl hood
• Mach 1 chin spoiler
• Stock otherwise
Interior
• Billet interior knob kit (window switches, ac knobs, radio knobs, e-brake handle)
• Auto dimming rearview mirror
• Autometer A piller pod -- Boost and fuel pressure gauges
• Stock otherwise
Rear end
• Moser 31 spline axles
• Eaton trac loc
• TA girdle
• 3.73 gears
I am sure I am forgetting some things, but the car is pretty complete.
Asking $15,000
Feel free to contact me @ 770-Five Hundred-8658 JB
I can only accept text during work hours!
I have tons more pictures, please just ask.