IRONMIKE
O.D.
Well, I hate to do it because I feel like I am selling a family member, butt here we go.
For Sale,
One, 4 seat, Toyota powered, full tube chassis, rock crawler/teraferma assult vehicle. Its got to go to finish my new rig. Please no trades. I am willing to meet at a reasonable distance to exchange. See the list below for all the goodies.
Chassis:
The main frame rails are 2X2X.25 square tubing. The rest is all 1.75 ECW .120 wall round tubing, all the body panels and hood are .125 diamond plate aluminum.
I have the material to make a top. It is rubberized canvas. I just never had the time to get to it.
KY Licensed as a Toyota Pick Up.
Fuel:
2, 8 gal. propane tanks
The buggy comes with 3 tanks.
Drive train:
Engine, New in 2013, 22RE, K+N air filter, Toyota base with Inter-co mixer, L.C. engineering cam and rockers, stock exhaust manifold, Flowmaster copy muffler from Advance Auto, Chevy, One wire 105A alternator, Chevy, TC power steering pump.
Trans, New in 2013 clutch, Toyota (W56) 5 speed, Toyota transfer cases w/Marlin Doubler, T.G. universal drilled flanges, custom drive shafts using all Toyota parts.
Suspension:
Front, Toyota rear springs, flipped backwards, Rancho shocks.
Rear, Ford F250 springs, Rancho socks.
118" Wheel base.
Front axle: (Grouped by who made it)
1985 Toyota housing with Sky Manufacturing stiffener, 4:10 Toyota 3rd, ARB air locker, solid pinion bearing sleeve, independent suspension vented rotors and calipers, steering box, .
Trail Gear, 27 spine alloy inners axles, trunion bearing eliminator kit, hub gears, diff cover, universal drilled flange, 1.5" spacers.
Longfeild, 27 spline Birfield, delron felt kit.
Marlin crawler, all the seals are the super seals.
Sky Manufacturing, high steer arms
Rear axle:
1987 Toyota pick up axle, 4:10 Toyota 3rd welded, stock axles, Chevy rotors and calipers.
Steering: (Grouped by who made it)
Toyota box drilled for assist.
Trail gear, 2" hydro assist steering cylinder.
Sky manufacturing, Steering linkage with FJ40 joints.
Tires:
Interco 39.5 TSLs on Trail ready beadlocks. These have one season left in them. You could grove them to get another.
Interior:
Toyota tilt steering and pedals
Sun gauges, RPM, Oil, Volts, Water.
Corbrea SS front suspension seats.
Geo Tracker rear split bench.
RJS 4 point harnesses in all four seats.
Garage sale CB and found on trail 6ft antenna.
Walmart speakers wired but never finished.
Other Goodies:
Warn 8K winch,
LED tail lights and turn signals,
This buggy needs nothing but a dry place to sit and trail savvy owner. Please see the pics and hit me up with any questions you may have. P.M me and I can text more pics if needed. Can meet at Off road expo also.
Asking $6000 was 7K, open to reasonable offers.
Thanks,
For Sale,
One, 4 seat, Toyota powered, full tube chassis, rock crawler/teraferma assult vehicle. Its got to go to finish my new rig. Please no trades. I am willing to meet at a reasonable distance to exchange. See the list below for all the goodies.
Chassis:
The main frame rails are 2X2X.25 square tubing. The rest is all 1.75 ECW .120 wall round tubing, all the body panels and hood are .125 diamond plate aluminum.
I have the material to make a top. It is rubberized canvas. I just never had the time to get to it.
KY Licensed as a Toyota Pick Up.
Fuel:
2, 8 gal. propane tanks
The buggy comes with 3 tanks.
Drive train:
Engine, New in 2013, 22RE, K+N air filter, Toyota base with Inter-co mixer, L.C. engineering cam and rockers, stock exhaust manifold, Flowmaster copy muffler from Advance Auto, Chevy, One wire 105A alternator, Chevy, TC power steering pump.
Trans, New in 2013 clutch, Toyota (W56) 5 speed, Toyota transfer cases w/Marlin Doubler, T.G. universal drilled flanges, custom drive shafts using all Toyota parts.
Suspension:
Front, Toyota rear springs, flipped backwards, Rancho shocks.
Rear, Ford F250 springs, Rancho socks.
118" Wheel base.
Front axle: (Grouped by who made it)
1985 Toyota housing with Sky Manufacturing stiffener, 4:10 Toyota 3rd, ARB air locker, solid pinion bearing sleeve, independent suspension vented rotors and calipers, steering box, .
Trail Gear, 27 spine alloy inners axles, trunion bearing eliminator kit, hub gears, diff cover, universal drilled flange, 1.5" spacers.
Longfeild, 27 spline Birfield, delron felt kit.
Marlin crawler, all the seals are the super seals.
Sky Manufacturing, high steer arms
Rear axle:
1987 Toyota pick up axle, 4:10 Toyota 3rd welded, stock axles, Chevy rotors and calipers.
Steering: (Grouped by who made it)
Toyota box drilled for assist.
Trail gear, 2" hydro assist steering cylinder.
Sky manufacturing, Steering linkage with FJ40 joints.
Tires:
Interco 39.5 TSLs on Trail ready beadlocks. These have one season left in them. You could grove them to get another.
Interior:
Toyota tilt steering and pedals
Sun gauges, RPM, Oil, Volts, Water.
Corbrea SS front suspension seats.
Geo Tracker rear split bench.
RJS 4 point harnesses in all four seats.
Garage sale CB and found on trail 6ft antenna.
Walmart speakers wired but never finished.
Other Goodies:
Warn 8K winch,
LED tail lights and turn signals,
This buggy needs nothing but a dry place to sit and trail savvy owner. Please see the pics and hit me up with any questions you may have. P.M me and I can text more pics if needed. Can meet at Off road expo also.
Asking $6000 was 7K, open to reasonable offers.
Thanks,