6.0 Headers

[stroyer]

Looking to save as much room as possible for driver side 2-piece front shaft....would it be possible to run two passenger side shorty headers & flip one around for the driver side? I'm planning on dumping driver exhaust around front of oil pan.

 

[rock mafia]

We've tried that before, it still takes up alot of room because the collectors are so far out off the block. We use block huggers at my shop and at m and m most of the time. They work ok if you are under 500 hp. Just cross under the oil pan from one side to the other. I prefer the hookers, but we have used speedway motors alot too.

http://www.jegs.com/p/Hooker-Headers/Hooker-Headers-Block-Hugger-Headers-for-LS1/759625/10002/-1

http://www.speedwaymotors.com/LS1-Block-Hugger-Tight-Fit-Headers-Plain,4614.html?utm_campaign=bazaarvoice&utm_medium=SearchVoice&utm_source=AskAndAnswer&utm_content=Default

 

[stroyer]

Awesome, thanks. I figured someone has tried it before...

 

[rock mafia]

Here you go, I found some pics of the hookers. The more recent ones I have used a 2 into 1 instead of the y.

 

[XJ savage]

I've got similar to above, Mine are Sanderson block hugger headers with 2" merging with 3". I don't have a pic of it installed but its about as tight as can possibly be.

 

[stroyer]

Here you go, I found some pics of the hookers. The more recent ones I have used a 2 into 1 instead of the y.

You have any pics of this setup installed? Would like to see how you have motor mounted....

Thanks for the pics, btw.

 

[collinmaune]

Do those headers there block the motor mounts I building a tube buggy and wanting to run block huggers from sandersons but it looks like they will block my motor mounts